Two of the flaps for my dryer vent went missing and my children are all claiming Innocence. Anyway, 30 minutes in tinkercad and I replaced them myself! (I didn't have any white petg)

Replacement (left) for the rusted metal hinges (right) on my garden bin cupboard. Probably could have bought some more but where in the fun in that? Printed in ASA.

The plastic that the clip is made of is really fragile. I figured it would probably break again if I tried to use the exact same design.

Used tpu for the black part to minimize possible damage to the guitar

Printed at 100% infill and heat annealed for better water resistance.

...and don't hassle me about the mismatched screws. Those were already on the machine!

https://preview.redd.it/z3dc2h9bsbad1.jpg?width=480&format=pjpg&auto=webp&s=ab486c299f82352fdffa1eb78839219f64c69a59

Hello everyone,

We are thrilled to join you all for this AMA. We are Barry Liu and Kira Luo from the Anycubic R&D team. Barry is responsible for the Anycubic Kobra 3 Combo, and Kira is in charge of the Anycubic Photon Mono M7 Pro.

https://imgur.com/a/A3rD3Gx

Two months ago, Anycubic launched two exciting new products: the Anycubic Kobra 3 Combo and the Anycubic Photon Mono M7 Pro. Since their release, these products have captured the attention of 3D printing enthusiasts around the world. Now that more users have started using these printers, we believe it’s the perfect time to engage with you, answer your questions, and gather your valuable feedback.

We understand that creating reliable, user-friendly 3D printers is crucial to everyone. Our goal is to ensure that these products meets your expectations and helps you achieve your creative projects. Your input is invaluable in helping us improve and innovate.

This AMA will start at 6:00 AM EST on 4th July, and we will get back to you from 3 AM EST to 6 AM EST on 5th July so that most of you from all over the world can participate. Barry Liu, Kira Luo, and I will be here for at least 3 hours to answer as many questions as possible.

We’re here to discuss everything from troubleshooting and tips to advanced features and future updates. Whether you're a beginner or an experienced maker, we’re eager to hear from you and help enhance your 3D printing experience.

PS: We're aware that there might be many interesting and important questions that cannot be answered due to the time limit. We will try my best to answer them in the coming week.

Thanks for the support of r/3Dprinting and r/anycubicofficial community.

Looking forward to your questions!

Best regards,

The Anycubic R&D Team

925 sterling silver

A couple of my WLED projects. I designed the hanging one to use addressable rgb strips, and the lower one uses custom designed PCB strips.

Have anyone else noticed this ? The slower you print, the shiner your surfaces get.

Printed on my Ankermake M5c out of a dual silk pla.

As requested in the previous post, I have conducted the same test using same color (white).

1.PLA - Hatchbox - White - Printed in Mk3s 2.PLA - Bambu Lab Basic - White - Printed in A1 Mini default profile 

Previous post for reference
First, let me clarify something: I knew it wasn’t a 100% fair comparison between green and white at first. However, I posted the video to highlight the huge difference I observed, which surprised me. I knew the color wasn’t the only factor, though it does play a role. I've printed many Hatchbox filaments in green, orange, and black, all of which were tested for AC vent clips. Thats why i end up using white . It performed slightly better, but not as significantly as yesterday's test. As seen in the video with the thermometer, the temperature difference around 4c, but overall it was a valuable test.

For first clip inside the car as you can see the the middle sample already soft check the lips of the clips dropped, i couldn’t do the test inside the car it was really hot with naked hand

So i left it to cool till around 76 c then tested

For the previous post, the majority of comments were about the color, which is a valid point. However, there are two comments I suggest giving a look at:

• by u/ensoniq2k ( PLA can be annealed to improve its heat resistance )

• by u/thekakester( Additives in PLA filaments, such as color pigments, plasticizers, stabilizers, and flow enhancers, can change thermal properties. )

Additional info:

1. The white PLA Hatchbox piece has been inside the car for 8 months.
2. The white PLA Hatchbox piece was printed on an Mk3s default profile, which is three times slower than the A1 Mini.
3. The white and green Bambu Basic filaments were printed on an A1 Mini default profile