Hi so I got myself a 3d Printer and this is basically the first thing I designed myself. It is a mount for my Razer seiren mini to mount to Vesa100 so that there is one less cable and thing below my monitor arm on my desk. There are some improvments to be made but if u want one u can get the files here:

https://makerworld.com/models/1590104

Just a warning tho this is my first go at 3D printing and modeling so it is far from perfect and any feedback and improvment ideas are really appreciated

A good companion for horror movies.
Maybe it's just psychological comfort,
but I casually printed a little something to match the vibe — done in 18 minutes.

Needed a short plinth to mount a shorter-than-normal (but legal!) license plate to the front of my car and wanted to use the existing screw holes in the bumper from the old large plinth. Scanned the bumper since the curves were quite complex. Learned a fair bit with the process (which I have not yet perfected) and would probably do it differently next time, but got there in the end and I’m really happy with the perfect fit. Printed in ASA, so it should withstand the UV and temps.

I have been printing for 3+ years now but never designed a model myself finally sat myself down learned the basics of Fusion360 and made this I feel a little proud of myself it's unreal how I designed something on my pc and 1 hour later have it in my hand :)

PET-G. I'm wheelchair-bound, so I need things to be low enough above the sink.

You’re in a rush, and suddenly the cat litter scoop snaps.

That happened to me. And honestly, it wasn’t the first time.

So I did what I usually do when something frustrates me, I redesigned it from scratch.

Most scoops on the market are made of thin plastic. Lightweight? Yes. Durable? Not really.

I wanted something stronger, something that lasts without overcomplicating the design.

It started with a quick hand sketch. Then I modeled it in SolidWorks and printed the first version on a 3D printer.

To my surprise, it turned out even better than I expected.

(And judging by the photo, my cat seems to approve too 😺)

I’ve quietly shared the model with a few people who enjoy 3D printing,and it’s been rewarding to see others find value in something that began as a personal fix to a small, annoying problem.

It made me wonder:What’s one everyday item you'd love to quietly reinvent?

So I designed this little bit holder the other day and I’m pretty happy with how it turned out. Most of the store bought ones I have are either annoying to remove and replace the bits, the bits fall out and rattle around, the lid pops open in my tool bag and everything falls out or are just flimsy garbage. I just have one inner tray design at the moment, but it’s removable so it can be switched out for other hole arrangements or dividers. I think I’m going to make something similar now for my 1/4” router bits. If you want one for yourself, it’s free to download on MakerWorld. Just look up my profile there, JB Custom Designs.

My neighbor, a retired safety inspector, kept bugging me about these stakes, so I added some 3d printed safety hearts ;) Let's see if they fulfill his safety codes 😂

I made my wife and plate holder for what I find as a creepy plate/bowl. But it works great as an invisible display holder.

I do feel like an idiot, took out the seat belt light, forgot it needed the height to make up for the missing spot.

But. Lights are brighter, and so far the ones you want to light up, do, and the onsles you don't want to, don't. So it's a temp win? Haha

Got a TRMNL e-ink display, and wanted to slap it on the fridge, so made a compact magnetic backplate for it. The locking pin has a bit of steel wire embedded within, so the magnets keep it from falling out even if you turn the setup sideways (for some reason).

Hi everyone,

I recently went to italy and the heat was unbearable so I looked up fans that can be attached to your belt that pump a fresh beeze under your shirt. All existing ones are way to big, inconvenient or expensive. So here ist my take with a small USB-turbine from amazon.

It is powered via Powerbank qnd I'm already working on an extension with a small tube to get the air exactly where you need it.

The design is with a printed clip, but as this ist the prototype I just went with a laundry clip as v1.

I spend a lot of hours on my bike on and indoor trainer. I decided to combine the wahoo twist mount to a ball socket phone mount adapter. That way I can use a Magsafe charger for my phone while I am on my trainer. Since I am on my trainer all of my biking stats are on a TV that is running zwift. So I don't use my bike computer and can use the wahoo mount to have my phone in front of me.

I feel like this is the perfect post for this community Slight annoyance every other month. I'll see how this thing holds up. Fit for the glass is perfect, I'm just curious if the "hands" will hold up fine *elegoo rapid petg on elegoo neptune 3 pro with ruby nozzle

It prints standing up, so after the tangle (middle piece in the second photo), I cut out the printed part and printed the rest and ended up with an almost equally functional print, haha!