Friend of mine sent this to me. Apparently somebody messed with the oven while he was away.

I always find it satisfying to watch hahah

Printed out a retraction tower with the start retraction of 0 and an end retraction of 5mm (1st pic) and one going from 5mm to 7mm (2nd pic) with 0.1mm step. And as it's seen in the photo at no point the stringing seems to stop

I've tried this on different printing tempratures and yet the issue still remains. I used PLA on 190c for this one

what should I do to fix this problem? What setting should I change?

Would love to know if you have any applications in mind.

I have been really into lamps recently and i spent like a month designing this in my free time. It was mainly inspired by a trick i saw on printables for making "fabric" out of thin layers with 50% gyroid.

I've also found it gives a really good top layer finish

Been loving the challenge of designing models that require no assembly. Recently designed a lego man with all of the joints moving. Took quite a few versions to get it right but really happy with the result.