If you couldn’t tell this was ment to be straight. Printed it out of pla, mostly because it was what I had, but I also didn’t expect my car to get this hot. It lasted a year and a couple months. Probably just gonna put it under hot water to get it straight again.

.. and he’s really into Breaking Bad at the moment. Mike is (was) his favorite character.

Esun PLA+ Bone, P1S, 23.5 hrs.

Few months ago i already made a Screw sorting device to sort screws by their length. I got alot of feedback and most requested Improvements were

Motorized version (optional)

• More Modular/ Support for more Screw sizes
• Bigger and more space for screws

So here i am with the improved version. Hope you Enjoy!

Available for Free on Makerworld

https://makerworld.com/de/models/1589824-m3-m6-screw-sorting-machine-motorized-or-by-hand#profileId-1674171

The pivot of our vacuum head was broken so i designed a replacement. I mostly copied the original, but didn't bother to copy part that didn't have a function. I used fusion 360 for the first time and it did take a little time to get used too. The print has been made with pla basic on a bambulab p1s. I printed it on a 45 degree angle as i heard it suppose to be stronger and it was using less support. It works grate so far.

They never even bothered sanding the print lines lmfao. This is the opening sequence of episode 1 haha gotta cut corners where you can huh hahaha

STL pls?

It's $2,500. What would be the hobbiest use for this? What would you print?

I really suck at painting but gave it my best shot ! Fully wearable and love the displaybase

This one was fun to print and make!

I printed the same lithophane out with some tweaked settings and no adjustments to speed (so just whatever standard printing speed it) and there's a noticeable difference, but at the same time the 2.5 hour one is still very good.

Printer: Anycubic Kobra S1 Filament: eSun cool white PLA Layer height: 0.15 Website used for litho: itslitho.com High resolution - 0.09-0.1mm per pixel

I know this is going to end up on r/3dprintingcirclejerk

I have no idea what use-case this would have besides being slightly more memorable if you gave it to a hiring manager, which might be all it takes sometimes. Regardless, I'm pretty new to 3D modelling and haven't seen anyone try to make anything cool with business cards. I'm sure some of you lot could make it look a lot better than my template, here.

https://makerworld.com/en/models/1587403-spinning-logo-business-card#profileId-1671361

Printed on my Bambu Lab A1.

I have some bronce filament but no idea what to Print. Any suggestions Welcome!

Made this for my favorite game hollow knight, printed in 9 peices with my ender 3. Turned out pretty cool!

Apparently she loves Benchy. And I love my A1 mini. 😊 I just wanted to share.

looks like someone forgot in on a train - or placed it on purpose.