This is a phone holder with adjustable inclination. It firmly holds set position without needing to engage any locking mechanism. Prints in place with no supports.

Yesteday evening a friend who has a shoe shop mentioned they needed something to measure the internal width of shoes. So I made him this and left it on his gate this morning. It's very basic, but it's just version 1, there certainly are improvements to be made, like a built-in ruler or improved stiffnes.

Fifteen minutes design time in tinkercad, 2 hours print time in PETG overnight. I got to setting up the printer barely two weeks ago and only just dialled PETG in, but the little functional prints I can make now are neverending and pretty helpful.

This part would be much better if printed flat, but I wanted to have it for him this morning, so he's getting complimentary support trees...

Parts with a sheet metal bracket.

Custom made some no touch glove box dispensers back in 2020 for my doctor's clinic. Caught the flu and went into a cubicle this morning and looked up, they're still being used and look great, no cracks or anomalies, had a small feeling of pride knowing that I made something that has lasted this long. Wish my ender3 could still print this well, I recall making at least 20, one after the other with zero hassles. Super cool.

I spent about 2 hours designing this in fusion to be exactly like the original and now it works perfectly!

Saved about $40 and shipping time too

The hose naturally can get pretty nasty when youre done cleaning so I made this to blast clean water straight back into the hose.

Bought a knife sharpner and didn't know if I was improving the cut or making it worse, so I decided to search for a sharpness test to print but didn't found any that suited the simplicity I was looking for, so I made a little one, just how I was looking for!
If anyone is interested, the model is freely available here https://makerworld.com/models/1304021

I have a big, black cat and big, black cat tower. The tower was purchased secondhand and two of the upper platforms were wobbly. The cat tower supports I designed and printed have made those platforms decidedly unwobbly. The diameter of the post hole is 2.79 inches (70.86 mm) , which fit very snug and secure on my particular tower. There is a cut version which eliminated overhang for one of my posts (see pictures). I have included .step files so you can make your own adjustments/remixes.

Here is the link to the files on Thingiverse: https://www.thingiverse.com/thing:7006203

My old broom was missing its hanging end. I designed and printed a new one to get it off the floor and onto the wall, saving space in the closet.

u/last_jellyfish7717 this is my version!

The second of two strap holders just broke on my Pebble Time Steel watch. Modeled a new one in Fusion360 in a few minutes, printed it in about 10 minutes on my Prusa mini. Works great, may bring the fillets in a bit more.