❌

Vista Normal

Hay nuevos artículos disponibles. Pincha para refrescar la página.
Hoy — 3 Abril 20253D printing

Problem with Y Shift

✇3D printing
Por: ／u／gadget3D
3 Abril 2025 at 06:40

Hi Guys, i have been trying to print this case for 2 days now, but I fail. I am using an anycubic kobra with

klipper installed. Lately I also have a small pi camera attached to the right front corner of the print bed.

The Model is quite long in Y and also has lots of base.

Yesterday I failed and I have detected a wobbly print bed.

After that i have found out, that i can fix that by tightening some screws below the print bed.

Now the bed is firm and i retried this night, but i feel the issue even got worse. now chance that the print-in-place hinges would ever work

https://imgur.com/a/0S88VW2

I have checked the x axis(print head) and y axis(bed) and both appear firm to me now

Any idea, what can be the issue ?

submitted by /u/gadget3D
[link] [comments]
Ayer — 2 Abril 20253D printing
Anteayer3D printing

What Needs to be improved?

✇3D printing
Por: ／u／unknown_hal
29 Marzo 2025 at 17:57
What Needs to be improved?

I got a neptune 3 pro, running on klipper but still no Input Shaping. What do I need to change on the printer and on Orca Slicer? My goal is to print as fast as possible with the stock components. Here are pictures from the benchy that was printed in 29 minutes and the settings from Orca Slicer. Every help is much appreciated!

https://preview.redd.it/02ynbkir3ore1.jpg?width=5120&format=pjpg&auto=webp&s=3d1d374fcbf9ea263933faf8a0a3a9754f37c579

https://preview.redd.it/7tfo7kir3ore1.jpg?width=5120&format=pjpg&auto=webp&s=947267c7974d539e59940a6da9df368142bfd7f5

https://preview.redd.it/qctxbkir3ore1.jpg?width=5120&format=pjpg&auto=webp&s=04ae616c322256e30f181a3a28d90e7848889b8b

https://preview.redd.it/3vp0doir3ore1.jpg?width=5120&format=pjpg&auto=webp&s=c78fc9c78c45da200e53d6e0a40b9311ae898f5a

https://preview.redd.it/ffqsvkir3ore1.jpg?width=3840&format=pjpg&auto=webp&s=64d72f3d716beb08510f6a8547b9ff340bd1c1f1

https://preview.redd.it/zm2s2nir3ore1.png?width=400&format=png&auto=webp&s=bc5d4fe2faf77ab1f78ffc16b03e6266352e9001

https://preview.redd.it/apc5hpir3ore1.png?width=378&format=png&auto=webp&s=dee0da67fca9159287f7efd033edf2e4690764f3

https://preview.redd.it/y9yhglir3ore1.png?width=322&format=png&auto=webp&s=c971b556a2101f5804585281212b567318b8473f

https://preview.redd.it/uh3y1oir3ore1.png?width=404&format=png&auto=webp&s=b17af00d368be12fc8e510b62745c9bce2180134

submitted by /u/unknown_hal
[link] [comments]

My printer is clogging on the feeder

✇3D printing
Por: ／u／ConfusedDove
26 Marzo 2025 at 16:14
My printer is clogging on the feeder

My printer is an Ender 3 and it's clogging on the feeder (i believe that's how is called, i left a pic of it), the filament is melting or crushing/squishing in it, making it too big to enter the tube, i already loosened the screws to check if it was too thigh, but nothing changed, i checked and it's not heating up to cause to melt before entering the tube, the fans are working just fine, i print PLA at 220, and slice at cura, i used the same config and temp for years and this never happened, i noticed after the clog that there's also some dust from the filament (you can also see on the picture)

https://preview.redd.it/kort0ckj62re1.jpg?width=1600&format=pjpg&auto=webp&s=1339be6b86ec86e8d8c0c3b28187bcacb0457cf2

https://preview.redd.it/pre67bkj62re1.jpg?width=1201&format=pjpg&auto=webp&s=135b32259109da51a58054f38a883dedf2939542

Any idea of how to fix it?

submitted by /u/ConfusedDove
[link] [comments]
❌
❌