Conectar  | submitted by /u/Marvelous_Mediocrity [link] [comments] |
Vista Normal
AnteayerSalida Principal
-
Functional 3D Printing
- Most cleaning wipes only come with those crappy sticky tape lids nowadays, and I hate those. So I... slightly over-designed this lid for zip lock bags so they can be used with wet cleaning wipes.
Simple magnetic ring for holding screws on my cordless screwdriver
22 Marzo 2025 at 16:46
-
- I got a pretty expensive light fixture for free because a component was broken, so I printed a replacement. Try to guess, from the first photo alone, which bit was replaced.
-
- Always hated the little clip stand on my tiny glue gun. It would either get in the way or I would forget to put it down again in the 'heat' of the moment while handling scalding hot glue. Now I don't have to worry about it ever again.
Always hated the little clip stand on my tiny glue gun. It would either get in the way or I would forget to put it down again in the 'heat' of the moment while handling scalding hot glue. Now I don't have to worry about it ever again.
14 Marzo 2025 at 01:06
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
Version 2 of my dust covers for Schuko sockets I uploaded here a while back
11 Marzo 2025 at 14:04
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
-
- Mini blowtorch neck guard... thing to prevent the hot tip from touching the ground.
Mini blowtorch neck guard... thing to prevent the hot tip from touching the ground.
7 Marzo 2025 at 14:55
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
TPU protective jaw covers for 12″ / 30cm adjustable wrenches
1 Marzo 2025 at 21:22
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
-
- I always liked the crank handles on those fancy milling vises, so I made one for my cheapo bench vise. You obviously still need to use the actual handle to tighten the vise, but the crank is great for quickly opening/closing it.
I always liked the crank handles on those fancy milling vises, so I made one for my cheapo bench vise. You obviously still need to use the actual handle to tighten the vise, but the crank is great for quickly opening/closing it.
1 Marzo 2025 at 16:17
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
-
- Simple dust cover for euro sockets, because they kept getting dirty in my kitchen and my workshop
Simple dust cover for euro sockets, because they kept getting dirty in my kitchen and my workshop
26 Febrero 2025 at 19:18
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
Screwdriver handle with storage for up to 20 hex bits
23 Febrero 2025 at 13:26
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
-
- Slightly over-designed air purifier handle that doubles as a magnetized build plate cooling mount
Slightly over-designed air purifier handle that doubles as a magnetized build plate cooling mount
13 Febrero 2025 at 04:47
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
Gridfinity storage box for 76 hex bits total (20 big ones, 56 small ones)
4 Febrero 2025 at 10:58
| | submitted by /u/Marvelous_Mediocrity [link] [comments] |
