I designed a simple motion activated light up fishing lure. The circuit uses a tilt switch to activate the small led for flashing effect and a super capacitor for fast charging (30 seconds) and lasts for around 2 hours of use. I also made a simple charger with a buck converter to limit the amount of voltage going to the capacitor.

Designed and made this waterproof case for a Holley terminator screen. This was for a friends airboat so it would be exposed to the elements. I also 3D printed the molds to make custom gaskets and cable glands out of silicone putty.

Hey r/3Dprinting community!

🎉 To celebrate the launch of the Formlabs Creator Series Resins, we’re giving away 10KG of resin—a mix of Creator Tough and Creator Super Clear! Whether you're printing robust functional parts or dazzling clear creations, these resins are designed to bring your ideas to life.

https://preview.redd.it/hyorl2fcl93e1.jpg?width=3841&format=pjpg&auto=webp&s=5cc4e514d7adfb67100a416ebe1e9465244023c3

Creator Resins are the first Formlabs resins designed specifically for use with non-Formlabs LCD & DLP 3D printers, such as those from Anycubic, Elegoo, Phrozen, Creality, and Uniformation, sold exclusively on Amazon.

The Creator Resins are made in America, use less hazardous chemicals, have validated print settings for 7 popular printer types, and have fantastic mechanical performance.

How to Enter:

• Comment below and tell us what you would most like to create using either Creator Tough Resin or Creator Super Clear Resin!
• Entry Deadline: Giveaway is open until Tuesday, Dec 3rd at 11:59 PM EST
• Winner Announcement: Wednesday, Dec 4th (We’ll reply to the winning comment, send a DM, and update the post)
• Eligibility: Open to USA only.

Prizes:

• We’ll pick 5 random winners from the comments to each receive 2KG of resin of either resin delivered straight to your door.

Let your imagination run wild—whether it’s tough functional parts, artistic designs, or super clear prototypes, we can’t wait to hear your ideas!

Learn more about the Creator Series Resins here.

Happy printing and good luck to all! 🚀

Here’s the most recent picture of my lifesized dummy 13. It’s 100% printed out of aceaddity ABS so some of these joints have been a pain to get on but we’re getting it done!😁 Does anyone have a suggestion for our next giant print?

It's about 5ft long, designed it so segments could be printed independently and then snapped together. Us neuro spicy people need more dopamine in our lives.

First there was the tunnel that didn't fit the new (taller) electric trains, then there was the bridge connector that snapped many many moons ago. What will be the next Brio improvement? I love that my adult hobby is enabling my childhood hobby to continue to live on for my children!

I 3d printed this little tool to remove caked greasy sawdust from the long axis of a 5x10 cnc wood router I recently purchased. It didn’t work exactly like I planned but it worked perfectly well compared to using a rag like I had started. Ball screw is a 4 start 36mm pitch 2.5mm ball. I should have made the OD larger so it would be easier to turn. Had to take it apart several times and clean the grunge from the tool. I had designed a sort of geometry on the cutting edge similar to what you would find on a lathe turning tool but it was not long enough.