submitted by /u/crazyotaku_22 [link] [comments] |
Vista de Lectura
3D printing gone wrong lol!
My first serious print
Today I finished my first serious print. Took some time to get my ankermake honed in to make a beautiful print. [link] [comments] |
3D Printing really is the coolest
Xenomorph by ET_ModelStudio who designed this on his iPad in Nomad Sculpt. Resin 3D Printed, then quickly dry brushed. Visor was wash/cured & wetsanded to 2000 grit then a light 1k clear coating [link] [comments] |
Overlooked this overhang and I'm quite impressed
Forgot to design this appropriately or to add supports. Realized while I was at work. Came home to an almost perfect overhang. Done on a well maintained CR-10S. [link] [comments] |
Need help in how to do this
Hi guys, so I have the Bubble head Pop figure and I want do the à base for it, with a cavity for the feet. In Fusion 360 what is the best approach to get that result? Any help is welcome [link] [comments] |
Some people call it it a mace, some call it a morningstar, I call it damned heavy (it's a flail).
A while ago I posted my version of Saurons mace which a lot of people seemed to like. Now, after several long months, I have completed a life sized version of the Witch King's Flail. I designed this basically twice, as I was trying very hard to make the size movie accurate. The first time I printed the handle and realized it was too small, which essentially meant I had to redesign it from the ground up at a larger scale. After that, I went and watched some BTS footage and really focused on just how big it is. After all is said and done, this weighs over 3kg. The chain is also fully 3d printed. This represents probably over 200 hours of printing (with a few mistakes and prototype pieces), with a perfect build probably coming in at about 150 hours. The handle is three pieces with 3d printed inner rods. The chain is 15 links that were printed at 45 degree angles without support. The flail head consists of many different pieces that fit together and is mostly 2 or 1 wall and still weighs about 2.5kg With my Saurons mace I didn't do any post processing, but got heavily involved with this to try and give this a nice weathered metallic look. If anyone is interested in how I got about it, just let me know. [link] [comments] |
I am the Lord of all that is Golden
Scaled up 400% Base printed in FDM in 1 piece on Elegoo 3 max Head and arms printed in resin on Peopoly phenom L [link] [comments] |