I wanted a way to keep my capo within easy reach and this was my solution. Threw it together in tinkercad. It is specific to a GS Mini and D’addario capo

i used the existing screw that came with the light to attach it to the printed part

I had to change the ceramic valves as the tap was constantly dripping. I over tightened the grub screw that holds the handle onto the valve and stripped the thread so the original metal piece is now garbage. Hopefully I'll get a few more years out of it. Mixer taps are expensive and this one has brand new valves.

Upcycled Espresso Knock Box

Upcycled my empty coffee can into a sleek and functional knock box for my espresso grounds!

Here's the model: https://makerworld.com/en/models/845829

I'm using IVCam to use my old iPhone 11 as a webcam.
Needed an adjustable holder. Made this.
I was going to use magnets to keep the case in, then just ended up hot gluing it :)
The phone case can be removed from the flexible arms. I'll also make base with weights so I can move to flat surfaces etc.

https://preview.redd.it/vxd1g2b70q4e1.png?width=752&format=png&auto=webp&s=adf1a504c35ec73cec844a4503c15563c661a39f

https://preview.redd.it/ufwy5x1g0q4e1.png?width=967&format=png&auto=webp&s=9f00b5c3e7d82a8bf977ac7056d3b3b584d9f8b9

https://preview.redd.it/m4n5y70h0q4e1.png?width=4032&format=png&auto=webp&s=2a41ef559e383758ca7290a5b6c7a7c1dcf9c371

This case keeps one single ciggie or similar safe and dry on trips, and is smellproof with an O-ring. It can be clipped onto a bag with the loop, or tucked safely into a bag.

Heres the model (drop a boost 😁):

https://www.makerworld.com/models/843446

Created to add storage for weights on my home made squat rack

Someone added the Dupont 2.54 pins for cutter

https://makerworld.com/models/837613

My latest design to help with the upcoming gift wrapping! No supports & no AMS/MMU required.

https://makerworld.com/en/@wuboo