It was a quick evening design after we got back so I know there are a bunch of opportunities for improvement! I'd like to make some slots/hooks for candy or bags and it could do with some optimizing to reduce the amount of filament used, but we'll roll with it for now and update it later.

It's a custom fit to this Redline scooter which has a 25mm Steering Tube and a 26.25mm Handlebar. I've included CAD files here (Slurp 'n Scoot) and you would just need to tweak the arc radius in a couple of places. Alternatively, let me know the dimensions on your scooter and I can upload one that's a custom fit.

Printed in PLA, 6 wall loops and triangular infill. Working as well as the original so far!

(also a good way to poke out an eye)

My first model, which is a brace for my Anker 733 PowerBank that started to separate due to use horizontally. This model supports the shell while also providing a wrap for cables.

https://www.printables.com/model/1258520-anker-733-power-bank-cable-wrap

Modelled in 15 minutes in a fit of rage after the original one from b&q snapped in 10 minutes after I bought the damn thing.

Would be interested in how you’d change it. I printed at 20% infill but think that might be a little low now.

please ignore the state of my house it’s under renovation lol.

I was gifted a ceremonial sledgehammer from a building project. I wanted to hang it on the wall in my office on an angle, no one makes such a thing AFAIK. Hindsight probably would have used white instead of translucent but works perfectly. Most complex model I’ve created thus far!

We have this top loading washing machine that's tucked under some cabinets so you can't fully open the top door and let it rest open.

I had some big, strong magnets laying around (as we all do) so I just designed and printed a little shell for it with some tabs to mount it to the cabinet.

it took under 15 minutes to print and it holds on relatively snug, only downfall is when you put the sun visor down, your glasses will slip out. i'Ve been using it for months now and it's great

Sunglasses Car Clip on Printables for those who want it

I regularly drive two different cars that have large fobs and since it's highly unlikely that I'll drive both at the same time 😉 I only take one fob with me. I've been using the key rings to swap out for a good while but just got really tired of doing that and wanted to make it a little easier by making them magnetic. There's a 'master' clip on my main key ring and then a 'slave' clip on each of the car fobs. This was my first design using fully encapsulated magnets and I found the process easier than I expected although the size of the print meant getting the bridging to adhere after the pause required a bit of tweaking.

Let me know if you have any suggestions!

Files: Magnetic Key Rack / Clips

Made this to help people out.

Easy way to keep the door slightly ajar for ventilation without letting pets through.

https://makerworld.com/en/models/1297362-door-prop-door-stay#profileId-1328966

Simple hooks to hang things off of Ikea Drona boxes.

I don’t have a fancy laser scanner, so I used the next best thing. Tape the cut out to the screen and traced it on CAD. Job done 👍