Conectar
 | Lots of Pokémon Colored with acrylic paint markers, permanent markers,.. Had loads of fun doing it! Great to add to my collection or put up as display. Printed it with white matte/marble PLA and then colored it. U can find them here: link to the collection: https://makerworld.com/en/collections/5629404-coloring [link] [comments] |
Vista de Lectura
Pokémon DIY Coloring - Printed in white PLA then used acrylic/permanent markers to color it!
Printed some cool whales
 | submitted by /u/Wafer_Tie1289 [link] [comments] |
I am building my own exoskeleton from scratch!
 | You can see my first steps in the pictures. the principle behind it is to work without motors, but with spring force. i have planned to place a gas pressure spring on the shin, which is actuated by a cable that goes up to the thigh. the cable transmits the force completely. i still have to do some calculations, but i'm curious to see if it all works afterwards. when assembling in inventor, i still have to add the ball bearings etc., but unfortunately i can't find a parts catalog that is compatible with inventor. the internal catalog of inventor is empty for me (for whatever reason) [link] [comments] |
Problem with Y Shift
Hi Guys, i have been trying to print this case for 2 days now, but I fail. I am using an anycubic kobra with
klipper installed. Lately I also have a small pi camera attached to the right front corner of the print bed.
The Model is quite long in Y and also has lots of base.
Yesterday I failed and I have detected a wobbly print bed.
After that i have found out, that i can fix that by tightening some screws below the print bed.
Now the bed is firm and i retried this night, but i feel the issue even got worse. now chance that the print-in-place hinges would ever work
I have checked the x axis(print head) and y axis(bed) and both appear firm to me now
Any idea, what can be the issue ?
[link] [comments]
Phone stand sharing
 | submitted by /u/Ines_z [link] [comments] |
Successful failure!
 | Just the wipe tower came loose, still printed fine, so a successful failure! [link] [comments] |
What Needs to be improved?
 | I got a neptune 3 pro, running on klipper but still no Input Shaping. What do I need to change on the printer and on Orca Slicer? My goal is to print as fast as possible with the stock components. Here are pictures from the benchy that was printed in 29 minutes and the settings from Orca Slicer. Every help is much appreciated! [link] [comments] |
Made this little tool station
 | submitted by /u/gamertuts [link] [comments] |
My printer is clogging on the feeder
 | My printer is an Ender 3 and it's clogging on the feeder (i believe that's how is called, i left a pic of it), the filament is melting or crushing/squishing in it, making it too big to enter the tube, i already loosened the screws to check if it was too thigh, but nothing changed, i checked and it's not heating up to cause to melt before entering the tube, the fans are working just fine, i print PLA at 220, and slice at cura, i used the same config and temp for years and this never happened, i noticed after the clog that there's also some dust from the filament (you can also see on the picture) Any idea of how to fix it? [link] [comments] |
Exú Lúcifer
 | submitted by /u/Outrageous-Seaweed18 [link] [comments] |
![[link]](https://i.redd.it/whcx0dcjmhte1.jpeg){kind=link}
![[link]](https://i.redd.it/39117wjt8kse1.jpeg){kind=link}
![[link]](https://i.redd.it/vc3dap73afse1.jpeg){kind=link}
![[link]](https://i.redd.it/326brhog70se1.jpeg){kind=link}
![[link]](https://i.redd.it/m9s0gqqh4nre1.jpeg){kind=link}
