I just want a gun stock for oculus 2 ALL PRINT

My first prints were amazing. Can't remember what happened since its over 1 year ago I used it.

I start to come closer to good prints again. Tgis is my first overhang test. Sadly my camera is a bit tired. I'll take new ones if asked.

Glad to be back in the game. Met a woman juat as I had started. Including first prints for reference

I designed and created the Philips orbit. A oneblade 360 stand. With a 360 rotateable attachment holder. You can find it for free on my printables. https://www.printables.com/model/1315088-philips-orbit-oneblade-360-stand/comments

This is a behind-the-scenes look at a recent industrial model we printed using PLA on an FDM printer. The full job took about 5 hours to complete and was designed specifically for a construction-sector project in the UAE.

We handle 3D printing for architectural models, automotive prototypes, and industrial displays using cost-efficient solutions. Whether you're curious about 3D printing prices in Dubai, or looking for low-cost 3D printing services that deliver quality – this is a good example of what’s possible with proper planning and optimized 3D modeling for printing.

🔧 Printer: Ender
🧵 Material: PLA
📍 Location: Dubai, UAE
🕒 Print Time: 5 Hours
📦 Use-Case: Construction industrial model
💼 Relevant for: 3D printing firms, architectural model makers, 3D print shops, 3D product designers

Happy to answer any questions about 3D printer printing cost, design preparation, or FDM vs resin for different types of models!

This 3D-printed house model was specially designed for a university graduation exhibition. Seeing it printed layer by layer was incredibly satisfying. To ensure better stability, it's safer to set the wall thickness to at least 1.2mm. I did run into some issues with the base layer not sticking properly during large-area prints, but lowering the print speed helped improve the situation.

Hey everyone, here are some of my works as a 3D modeler. If anyone needs a 3D model for printing, just send an email to: [filipefennerpoa@gmail.com](mailto:filipefennerpoa@gmail.com)

I’ve created a Motorcycle Kickstand Plate featuring text for nearly all popular motorcycle brands! It’s a great way to show some pride while keeping your kickstand stable on soft or uneven ground. Check it out and give your bike a practical upgrade!

https://makerworld.com/en/models/1468977-motorcycle-kickstand-plate

A wood-textured planter made with milk tea-colored PLA looks very natural.

What do you think about this diec tower set I designed for 3d printing?

Here you can find the STL FILES

I had some end-of-reel leftover black PLA, so I printed this hummingbird wall art with my FLSUN SR.

I did one last glue-on-tape PLA-adhesion R&D test. I made accurate serial dilutions of Lepage carpenter glue and applied the diluted glue solutions (with a small brush) to 1/8 sections of the printing plate (covered with tape).

The amounts of glue in 12ml water were: 0.0g, 0.1g, 0.2g, 0.5g, 1.0g, 2.0g, 3.0g, 4.0g.

For this particular glue, the 1part glue + 5parts water was the lowest dilution which significantly improved adhesion. Higher concentrations of glue had even better adhesion. I printed everything simultaneously on my FLSUN SR to avoid variability.

I tested silk PLA and it too adheres super well.

I also performed tests with the plate heat turned OFF, and the adhesion was still excellent (although a 1+4 dilution is probably safer).

Does anyone dare to make a detailed 3D STL of this image and publish it?

Is there anyone who would trade me the 13D printed movie Robert face with a robot mouth that can open and close through a servo motor?