I've got some updates on my homelab!

I have added into my set up, a 240VAC Nortel MPR 25 rectifier. Puts out 53VDC and has a load/charge display on it! This unit was designed for an OPM cabinet for the DMS 10 Family telecommunications system. I've tied this into my panel with a tandem 20A breaker.

I have made a battery bank equal to 48V to keep as a redundant power feed for my new to arrive Adtran Netvanta 5660 Gigabit Router.

I have configured my NetVanta 1534P to have several Vlans to my network. The first 14 ports are for my personal network, then ports 15-22 are on a seperate Vlan for when I get PoE cameras. This switch provides PoE and I have enabled these ports. 23 and 24 are WAPs for the guest network when guests arrive! The 25th port is a trunk port that tags both vlans and has the untagged vlan for my regular network.

I added Merlin firmware on my asus AX82U to get some more features, and was hoping to get an actual Vlan configuration tab, but it didn't help. So I had to go about enabling the first guest networks on both 2.4 and 5GHz bands to obtain the Vlans 501 and 502. I changed the SSID names, and marked them hidden with intranet disabled. I configured my switch and I saw the IP addresses in my router populate with their proper IP addresses on the ports assigned those vlans!

I have also added in for now, which I plan to beef up to a much larger unit. A power inverter to power my secondary AC power supply in my DL380P server, and the 1534P. I plan on adding in my personal gaming PC to the inverter for battery backup when power fails while gaming.

If you remember a few months back, I made a 12V battery bank and was talking about getting an AGM standby battery. Well, I actually have sourced one out and will be getting it shortly. I was trying to recoup some of the old ones at my place of employment, from some reach cabinet removals but they are being planned for repurposing. If they aren't, then I'll get a few then.

I have an allied AT-9924T that currently has 2 110v AC PSUs

They both had a mixture of failed fans so I took 1 fan from each unit and made a whole quiet PSU.

I'd like to add a DC PSU like this one, but I can't seem to locate the DC variant.

Anyone have an idea where I can get one?