Anyone Have Luck w/ Onboard SlimSAS?
Hello,
I went a week or so with a ZFS pool with 8 SATA drives via SlimSAS and two via SARA on a ASRock TRX50 WS and today the SlimSAS connected drives (via 2x SFF-8654 4i connectors) are just not cooperating. 1-2 show as REMOVED when I reboot the server and when I run `zpool clear <poolname>` the rest show as UNAVAIL.
state: SUSPENDED
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-HC
scan: resilvered 688K in 00:00:00 with 0 errors on Wed Jul 3 08:38:53 2024
config:
NAME STATE READ WRITE CKSUM
tank UNAVAIL 0 0 0 insufficient replicas
raidz1-0 UNAVAIL 0 0 0 insufficient replicas
ata-ST20000NM004E-3HR103_ZX21178V REMOVED 0 0 0
ata-ST20000NM004E-3HR103_ZX2119KV REMOVED 0 0 0
ata-ST20000NM004E-3HR103_ZX212NRG UNAVAIL 0 0 0
ata-ST20000NM004E-3HR103_ZX213EN2 UNAVAIL 0 0 0
ata-ST20000NM004E-3HR103_ZX2117BV UNAVAIL 0 0 0
ata-ST20000NM004E-3HR103_ZX213CZK UNAVAIL 0 0 0
ata-ST20000NM004E-3HR103_ZX213E7P UNAVAIL 0 0 0
ata-ST20000NM004E-3HR103_ZX2116F6 UNAVAIL 0 0 0
ata-ST20000NM004E-3HR103_ZX213CQC ONLINE 0 0 0
ata-ST20000NM004E-3HR103_ZX213D2F ONLINE 0 0 0
errors: List of errors unavailable: pool I/O is currently suspended
Since my two SATA drives always show as ONLINE I am highly suspicious of the SlimSAS on the motherboard. I have a couple LSI 9207-8i's sitting in a case in my storage unit, am I best off just switching over to these or is there more debugging I can do here? If I do switch will ZFS recognized these as the same drives even though the adapter changed?
Thanks!
[link] [comments]