If you think of Apple today, you probably think of an iPhone or a Mac. But the original Apple I was a simple PC board and required a little effort to start up a working system. [Artem] has an Apple I reproduction PCB, and decided to build it on camera so we could watch.

For the Apple I, the user supplied a keyboard and some transformers, so [Artem] had to search for suitable components. He wisely checks the PCB to make sure there are no shorts in the traces. From there, you can watch him build the machine, but be warned: even with speed ups and editing, the video is over an hour long.

If you want to jump to the mostly working device, try around the 57-minute mark. The machine has a basic ROM monitor and, of course, needs a monitor. There was a small problem with memory, but he eventually worked it out by inhibiting some extra RAM on the board. Troubleshooting is half of the battle getting something like this.

Want to look inside the clock generator chip? Or skip the PCB and just use an FPGA.

If Apple has a reputation for anything other than decent hardware and excellent industrial design, it’s for selling its products at extremely inflated prices. But there are some alternatives if you want the Apple experience on the cheap. Buying their hardware a few years out of date of course is one way to avoid the bulk of the depreciation, but at the extreme end is this working Mac clone that cost just $14.

This build relies on the fact that modern microcontrollers absolutely blow away the computing power available to the average consumer in the 1980s. To emulate the Macintosh 128K, this build uses nothing more powerful than a Raspberry Pi Pico. There’s a little bit more to it than that, though, since this build also replicates the feel of the screen of the era as well. Using a “hat” for the Pi Pico from [Ron’s Computer Videos] lets the Pico’s remaining system resources send the video signal from the emulated Mac out over VGA, meaning that monitors from the late 80s and on can be used with ease. There’s an option for micro SD card storage as well, allowing the retro Mac to have an incredible amount of storage compared to the original.

The emulation of the 80s-era Mac is available on a separate GitHub page for anyone wanting to take a look at that. A VGA monitor is not strictly required, but we do feel that displaying retro computer graphics on 4K OLEDs leaves a little something out of the experience of older machines like this, even if they are emulated. Although this Macintosh replica with a modern e-ink display does an excellent job of recreating the original monochrome displays of early Macs as well.

The iPod once reigned supreme in the realm of portable music. Hackers are now working on preserving one of its less lauded functions — gaming. [via Ars Technica]

The run of 54 titles from 2006-2009 may not have made the iPod a handheld gaming success, but many still have fond memories of playing games on the devices. Unfortunately, Apple’s Fairplay DRM has made it nearly impossible to get those games back unless you happened to backup your library since those games can’t be downloaded again and are tied to both the account and iTunes installation that originally purchased the game.

Fortunately, intrepid hackers found syncing their iPods (or iTunes libraries) with working copies of the games could reauthorize the games via Apple’s servers to a secondary iTunes installation. Any supported iPod could then be linked to this installation and get the games as well. Through the wonders of virtualization, the iPod Clickwheel Games Preservation Project by [Olsro] allows you to install many of these games on your own iPod with an iTunes install inside a Windows 10 VM which saves the expense of shipping iPods all over the place.

Looking for some more ways to get into iPod hacking? How about some upgrades or a look back at how the first iPod hacks started?

Many MacOS users are probably used by now to the annoyance that comes with unsigned applications, as they require a few extra steps to launch them. This feature is called Gatekeeper and checks for an Apple Developer ID certificate. Starting with MacOS Sequoia 15, the easy bypassing of this feature with e.g. holding Control when clicking the application icon is now no longer an option, with version 15.1 disabling ways to bypass this completely. Not unsurprisingly, this change has caught especially users of open source software like OpenSCAD by surprise, as evidenced by a range of forum posts and GitHub tickets.

The issue of having to sign applications you run on MacOS has been a longstanding point of contention, with HomeBrew applications affected and the looming threat for applications sourced from elsewhere, with OpenSCAD issue ticket #880 from 2014 covering the saga for one OSS project. Now it would seem that to distribute MacOS software you need to have an Apple Developer Program membership, costing $99/year.

So far it appears that this forcing is deliberate on Apple’s side, with the FOSS community still sorting through possible workarounds and the full impact.

Thanks to [Robert Piston] for the tip.

For those of you longing for better gaming on an Apple Silicon device, Asahi Linux is here to help.

While Apple’s own line of CPUs are relatively new kids on the block, they’ve still been around for four years now, giving hackers ample time to dissect their innards. The team behind Asahi Linux has now brought us “the only conformant OpenGL®, OpenCL, and Vulkan® drivers” for Apple’s M1 and M2.

The emulation overhead of the system means that most games will need at least 16 GB of RAM to run. Many games are playable, but newer titles can’t yet hit 60 frames per second. The developers are currently focused on “correctness” and hope to improve performance in future updates. Many indie titles are reported to already be working at full speed though.

You can hear more about some of the fiddly bits of how to “tessellate with arcane compute shaders” in the video below. Don’t worry, it’s only 40 minutes of the nine hour video and it should start right at the presentation by GPU dev [Alyssa Rosenzweig].

If you want to see some of how Linux on Apple Silicon started or some of the previous work on hacking the M1 GPU, we have you covered.

Over the years, Apple has gone all-in on parts pairing. Virtually every component in an iPhone and iPad has a unique ID that’s kept in a big database over at Apple, which limits replacement parts to only those which have their pairing with the host system officially sanctified by Apple. With iOS 18 there seems to be somewhat of a change in how difficult getting a pairing approved, in the form of Apple’s new Repair Assistant. According to early responses by [iFixit] and in a video by [Hugh Jeffreys] the experience is ‘promising but flawed’.

As noted in the official Apple support page, the Repair Assistant is limited to the iPhone 15+, iPad Pro (M4) and iPad Air (M2), which still leaves many devices unable to make use of this feature. For the lucky few, however, this theoretically means that you can forego having to contact Apple directly to approve new parts. Instead the assistant will boot into its own environment, perform the pairing and calibration and allow you to go on your merry way with (theoretically) all functionality fully accessible.

The bad news here is that parts whose IDs show up as being locked (Activation Lock) are ineligible, which is something you cannot tell when you’re buying replacement parts. During [iFixit]’s testing involving swapping logic boards between two iPhone 15 Pros they found many issues, ranging from sudden reboots during calibration and boot looping. Some of these issues were due to the captive-portal-based WiFi network at [iFixit] HQ, but after eliminating that variable features like Face ID still refused to calibrate among other issues.

Meanwhile [Hugh]’s experiences have been more positive, but the limited nature of this feature, and the issues surrounding used and third-party parts, mean that the practical use of this Repair Assistant will remain limited, with tons of perfectly fine Activation Locked parts scrapped each year and third-party parts requiring pairing hacks to make basic features work, even on Apple’s MacBooks.

IOS 18 also adds battery monitoring for third-party batteries, which is a nice touch, but one cannot help but get the feeling that Apple is being dragged kicking and screaming into the age of easy repairs and replacements with Apple devices.

---

Featured image: A stack of Activation Locked MacBooks destined for the shredder in refurbisher [John Bumstead]’s workshop.

Chapple is an AI-powered content creator that allows anyone to quickly generate high-quality text, images, and code with versatile AI tools and templates. The intuitive interface means no learning curve – simply choose a template, customize it, and produce polished content in a fraction of the time. Join the creative revolution and say goodbye to […]

Source

AI Picasso is a free mobile app which lets you generate AI images and art using Stable Diffusion. The app is free to use but is monetized by 10 second in-app ads which can be rather annoying. There are still a nice range of features and the image generation is relatively fast. Since there are […]

Source