The proliferation of microcontrollers has made it easier than ever to add some smarts to a project, but sometimes there just isn’t enough space for headers on a board, or you feel a little silly soldering something that will get used to flash a program then languish inside your build. [Dima] wanted to make his boards easier to flash, and developed a PCB footprint and flashing tool pair that makes use of the mounting holes on his boards.

While some debugging tools might use a clamp or tape, [Dima] discovered that using sprung pins only on one side of the connector wedged his fixed locator pin (originally a 1 mm drill bit) into the hole removing the need for any other holding mechanism.

His original prototype worked so well that it took him some time to get back around to making a more reproducible design that didn’t involve fine soldering and superglue. After enlarging the contact pads and several iterations of 3D printing, he developed an interface connector that uses standard jumper wires and a steel rod to provide a sturdy and reliable connection for flashing boards with the corresponding footprint. He’s currently a little disappointed with the overall size of the connector though, and is soliciting feedback on how to make it smaller.

While [Dima]’s MCU of choice is the STM32, but this design should be applicable to any other microcontrollers using a five wire system, or you could take one off for USB. Having trouble finding the SWD points on an existing device? Try this method.

Thanks to [DjBiohazard] for the tip!

While track pads and mice dominate the pointing device landscape today, there was a time when track balls were a major part of the scene. In order to really sell the retro chops of his portable computer, [Ominous Industries] designed a clip-on style track ball for his retro Raspberry Pi laptop.

Starting with a half circle shape, he designed the enclosure in Fusion360 to house the guts of a USB trackball. Using the pattern along a path feature of the software, he was able to mimic the groovy texture of the main device on the trackball itself. Flexures in the top of the track ball case with pads glued on actuate the buttons.

We appreciate the honesty of the cuts showing how often the Pi can get grumpy at the extra wide display in this video as well as the previous issues during the laptop build. The bezel around the screen is particularly interesting, being affixed with magnets for easy access when needing to work on the screen.

Retro portables are having a moment. We just covered the Pi Portable 84 and previously saw one inspired by the GRiD Compass . If you’re more interested in trackballs, maybe give this trackball ring or the Ploopy trackball a look?