Telephone systems predate the use of cheap computers and electronic switches. Yesterday’s phone system used lots of stepping relays in a box known as a “selector.” If you worked for the phone company around 1951, you might have seen the Bell System training film shown below that covers 197 selectors.

The relays are not all the normal ones we think of today. There are slow release relays and vertical shafts that are held by a “dog.” The shaft moves to match the customer’s rotary dial input.

Be sure to check out part two to get the whole story. Actually, we think [Periscope] switched the videos, so maybe start with part two. It sort of gives an overview and more of a mechanical perspective. Part one shows the schematic and assumes you know about some things covered in what they are calling part two.

You have to wonder who designed these to start with. Seems hard enough to follow when someone is explaining it, much less dreaming it up from scratch. Like most things, many people contributed to the development of the technology, and we are pretty sure the type 197 selector wasn’t the first device to appear.

Watching the current flow through the wires in the video reminded us of the Falstad circuit simulator.

Bluetooth is a good way to connect devices that are near each other. However, it can drain batteries which is one reason Bluetooth Low Energy — BLE — exists. [Drmph] shows how easy it is to deploy BLE to make, in this case, a doorbell. He even shows how you can refit an existing doorbell to use the newer technology.

Like many projects, this one started out of necessity. The existing wireless doorbell failed, but it was difficult to find a new unit with good review. Cheap doorbells tend to ring spuriously due to interference. BLE, of course, doesn’t have that problem. Common BLE modules make up the bulk of the project. It is easy enough to add your own style to the doorbell like a voice announcement or musical playback. The transmitter is little more than a switch, the module, a coin cell, and an LED.

It is, of course, possible to have a single receiver read multiple doorbells. For example, a front door and back door with different tones. The post shows how to make a remote monitor, too, if you need the bell to ring beyond the range of BLE.

A fun, simple, and useful project. Of course, the cool doorbells now have video. Just be careful not to get carried away.