If you’ve used the Espressif series of processors, perhaps you’ll have heard of their upcoming ESP32-P4. This is an application processor, with dual RISC-V cores at 400 MHz, and save for a lack of an MMU, a spec sheet much closer to the kind of silicon you’d find in single board computers with pretensions towards being a mini-PC.

It was announced a year ago and there have been limited numbers of pre-release versions of the chip available to developers, but thus far there have been very few boards featuring it. We’re excited then to note that a P4-based board we’ve been watching for a while is finally breaking cover, and what’s more, you can now pre-order one.

The Tanmatsu (Japanese for “Terminal”) is an all-in-one palmtop computer for hackers, with a QWERTY keyboard and an 800×480 DSI display. It’s designed with plenty of expansion in mind, and it’s got space on board for a LoRa radio. The reason we’re interested is that it comes from some of our friends in the world of event badges, so we’ve seen and handled real working prototypes, and we know that its makers come from a team with a proven record in manufacture and delivery of working hardware. The prototype we saw had hardware that was very close to the final version, and an operating system and software that was still under development but on track for the April release of the device. It will be fully open-source in both hardware and software.

We liked what we saw and have pre-ordered one ourselves, so we’ll be sure to bring you a closer look when it arrives.

Over the course of the 1990s we saw huge developments in the world of PC graphics cards, going from little more than the original IBM VGA standard through super VGA and then so-called “Windows accelerator” cards which brought the kind of hardware acceleration the console and 16 bit home computer users had been used to for a while. At the end of the decade we had the first generation of 3D accelerator chipsets which are ancestors of today’s GPUs.

It was a great time to be a hardware enthusiast, but as anyone who was around at the time will tell you, the software for the drivers hadn’t caught up. Particularly for Windows 3.1 it could be something of a lottery, so [PluMGMK]’s modern generic SVGA driver could have been extremely useful had it appeared at the time.

As many of you will be aware, there is a set of VESA standardized BIOS extensions for video modes. There were generic VESA drivers back in the day, but they would only provide a disappointing selection of options for what the cards could do even then. The new driver provides support for all the available modes supported by a card, at all color depths. Windows 3.1 in true-color full HD? No problem!

It’s unexpected to see Program Manager and a selection of windows spread across so much real-estate, almost reminiscent of the uncluttered desktops from early ’90s workstations if you disregard the bright colors. We can’t help noticing it wins in one way over even the latest version of MacOS at these resolutions though, as anyone who has ever used a 4K screen on a Mac and found the menus remain miles away up in the top corner will tell you. Meanwhile if you’ve not had your fill of 16-bit Windows, how about sticking it in a ThinkPad BIOS?

In the quest for an accurate frequency standard there are many options depending on your budget, but one of the most affordable is an oven controlled crystal oscillator (OCXO). [RF Burns] has a video looking at one of the cheapest of these, a sub ten dollar AliExpress module.

A crystal oven is a simple enough device — essentially just a small box containing a crystal oscillator and a thermostatic heater. By keeping the crystal at a constant temperature it has the aim of removing thermal drift from its output frequency, meaning that once it is calibrated it can be used as a reasonably good frequency standard. The one in question is a 10 MHz part on a small PCB with power supply regulator and frequency trimming voltage potentiometer, and aside from seeing it mounted in an old PSU case we also are treated to an evaluation of its adjustment and calibration.

Back in the day such an oscillator would have been calibrated by generating an audible beat with a broadcast standard such as WWV, but in 2024 he uses an off-air GPS standard to calibrate a counter before measuring the oven crystal. It’s pretty good out of the box, but still a fraction of a Hertz off, thus requiring a small modification to the trimmer circuit. We’d be happy with that.

For the price, we can see that one of these makes sense as a bench standard, and we say this from the standpoint of a recovering frequency standard nut.

We love electronic conference badges here at Hackaday, but it’s undeniable that many of them end up gathering dust after the event. Most of them are usable as development boards though, so it’s nice to see them appear in projects from time to time. [Benjamin Blundell] has a good one, he’s using an EMF Camp 2014 badge to power a set of load cells in a bee scale.

Not being skilled in the art of apiary here at Hackaday we’re thankful for his explanation. Beekeepers weigh their hives as a means of gauging their occupancy, and the scale for this purpose has a few application specific features. The EMF 2014 badge (known as the TiLDA MKe) meanwhile is an Arduino Due compatible ARM Cortex M0 board with an LCD display, making it perfect for the job. He devotes quite some time to describing the load cells, mounting them on extrusion, and calibration, all of which should be of use to anyone making a scale.

The software for the badge is an odd mix of Arduino and FreeRTOS, and he takes one of the stock apps and modifies it for the scale. It’s very much a badge of its era, being programmable but not with a built-in interpreter for MicroPython or similar. You can see the whole project at work in the video below the break.

If you’ve not seen a TiLDA MKe before, we wrote about it when it was released.

The art of writing has become a cluttered one to follow, typically these days through a graphical word processor. There may be a virtual page in front of you, but it’s encumbered by much UI annoyance. To combat this a variety of distraction free software and appliances have been created over the years.

But it’s perhaps [Liam Proven]’s one we like the most — it’s a bootable 16-bit DOS environment with a selection of simple text and office packages on board. No worries about being distracted by social media when you don’t even have networking.

The zip file, in the releases section of the repository, is based upon SvarDOS, and comes with some software we well remember from back in the day. There’s MS Word 5.5 for DOS, in the public domain since it was released as a Y2K fix, Arnor Protext, and the venerable AsEasyAs spreadsheet alongside a few we’re less familiar with. He makes the point that a machine with a BIOS is required, but those of you unwilling to enable BIOS emulation on a newer machine should be able to run it in a VM or an emulator. Perhaps it’s one to take on the road with us, and bang away in DOS alongside all the high-powered executives on the train with their fancy business projections.

We recently talked about SvarDOS, and it shouldn’t come as a surprise that our article linked to a piece [Liam] wrote for The Register.

We all know that “Can it run DOOM?” is the first question of a hardware hacker. The 1993 first person shooter from id Software defined an entire genre of games, and has since been made open source, appearing on almost everything. Everything, that is, except a Captcha, those annoying “Are you a human” tests where we’re all expected to do a search giant’s image classification for them. So here’s [Guillermo Rauch] with a DOOM captcha, in which you must gun down three bad guys to proceed.

As a way to prove you’re a human we can’t imagine a more fitting test than indiscriminate slaughter, and it’s interesting to read a little about what goes on behind the scenes. It’s a WebAssembly application as you might have guessed, and while it’s difficult to shake that idea from the early ’90s that you needed a powerful computer to run the game, in reality it shows just how powerful WebAssembly is, as well as how far we’ve come in three decades.

We’d prefer a few different entry points instead of always playing the same level, and we were always more handy with the mouse than the keyboard back in the day, but it’s certainly a bit of fun. It’s worth noting that simply playing the game isn’t enough to verify your humanity — if you’re killed in the game before vanquishing the required three foes, you’ll have to start over. As the game is running at “Nightmare” difficulty, proving your worth might be a tad harder than you’d expect…

Need more DOOM? How about seeing it on hardware nobody would have believed in 1993?

The world of audio has produced a variety of different loudspeaker designs over the last century, though it’s fair to say that the trusty moving coil reigns supreme. That hasn’t stopped plenty of engineers from trying new ways to make sound though, and [R.U.H] is here with a home-made version of one of them. It’s a foil tweeter, a design in which a corrugated strip of foil is held in a magnetic field, and vibrates when an audio frequency current is passed through it.

He shows a couple of takes on the design, both with neodymium magnets but with different foils and 3D printed or wooden surrounds. They both make a noise when plugged into an amplifier, and unsurprisingly the thicker foil has less of the high notes.

We can see that in there is the possibility for a high quality tweeter, but we can’t help having one concern. This device has an extremely low impedance compared to the amplifier, and thus would probably be drawing far too much current. We’d expect it to be driven through a transformer instead, if he had any care for not killing the amplifier.

Happily there are other uses for a ribbon, they are far better known as microphones.

The moment everyone has been talking about for years has finally arrived, the European Union’s mandating of USB charging on all portable electronic devices is now in force. While it does not extend beyond Europe, it means that there is a de facto abandonment of proprietary chargers in other territories too. It applies to all mobile phones, tablets, digital cameras, headphones, headsets, game consoles, portable speakers, e-readers, keyboards, mice, portable navigation systems and earbuds, and from early 2026 it will be extended to laptops.

Hackaday readers will probably not need persuading as to the benefits of a unified charger, and truth be told, there will be very few devices that haven’t made the change already. But perhaps there’s something more interesting at work here, for this moment seals the place of USB-C as a DC power connector rather than as a data connector that can also deliver power.

Back in 2016 we lamented the parlous state of low voltage DC power standards, and in the time since then we’ve arrived at a standard involving ubiquitous and commoditised power supplies, cables, and modules which we can use for almost any reasonable power requirement. You can thank the EU for that mobile phone now having the same socket as its competitor, but you can thank the USB Implementers Forum for making DC power much simpler.

Social media microblogging has brought us many annoying things, but some of the good things that have come to us through its seductive scrolling are those ad-hoc interest based communities which congregate around a hashtag. There’s one which has entranced me over the past few years which I’d like to share with you; the Shitty Camera Challenge. The premise is simple: take photographs with a shitty camera, and share them online. The promise meanwhile is to free photography from kit acquisition, and instead celebrate the cheap, the awful, the weird, and the wonderful in persuading these photographic nonentities to deliver beautiful pictures.

Where’s The Hack In Taking A Photo?

Of course, we can already hear you asking where the hack is in taking a photo. And you’d be right, because any fool can buy a disposable camera and press the shutter a few times. But from a hardware hacker perspective this exposes the true art of camera hacking, because not all shitty cameras can produce pictures without some work.

The #ShittyCameraChallenge has a list of cameras likely to be considered shitty enough, they include disposables, focus free cameras, instant cameras, and the cheap plastic cameras such as Lomo or Holga. But also on the list are models which use dead film formats, and less capable digital cameras. It’s a very subjective definition, and thus in our field everything from a Game Boy camera or a Raspberry Pi camera module to a home-made medium format camera could be considered shitty. Ans since even the ready-made shitty cameras are usually cheap and unloved second-hand, there’s a whole field of camera repair and hacking that opens up. Finally, here’s a photography competition that’s fairly and squarely on the bench of Hackaday readers.

A Whole World Of Shitty Awesomeness Awaits!

Having whetted your appetite, it’s time to think about the different routes into camera hacking. Perhaps the simplest is to take a camera designed for an obsolete film format, and make a cartridge or spool that takes a commonly available film instead. Perhaps resurrecting an entire home movie standard is a little massochistic, but Thingiverse is full of 3D-printable adapters for more everyday film. Or you could make your own, as I did for my 1960s Agfa Rapid snapshot camera.

If hacking film cartridges seems a little low-tech, a camera whether film or digital is a simple enough device mechanically that making your own is not out of the question. At its simplest a pinhole camera can be made from trash, but we think if you’re handy with a CAD package and a 3D printer you should be able to do something better. Don’t be afraid to combine self-made parts with those from manufactured cameras; when every second hand store has a pile of near-worthless old cameras for relative pennies it makes sense to borrow lenses or other parts from this boanaza. And finally, you don’t need to be a film lover to join the fun, if a Raspberry Pi or an ESP cam module floats your boat, you can have a go at the software side too. As a hint, take a look on AliExpress for a much wider range of camera modules and lenses than the ones supplied with either of these boards.

If I’m exhorting readers to have a go with a shitty camera then, perhaps I should lead by example. Past entries of mine have come from that Agfa Rapid cartridge I mentioned, but for their current outing I’ve gone for a mixture of new and old. The new isn’t a hack, I just like those toy cameras with the thermal printers, but the old one has been quite a project. Older consumer grade Polaroid pack film instant cameras are particularly unloved, so I’ve 3D-printed a new back for mine that takes a 120 roll film. It’s an ungainly camera to take to the streets with, but now I’ve finished all that 3D printing I hope I’ll get those elusive dreamy black and white landscapes on my poll of FomaPan 100.

If you want to try the #ShittyCameraChallenge, hack together a shitty camera and get shooting. Its current iteration lasts until the 1st of February, so you should have some time left to post your best results on Mastodon. Good luck!

There was a brief period through the 1960s into the 1970s when the last word in electronics was the calculator. New models sold for hundreds of dollars, and owning one made you very special indeed. Then the price of the integrated circuit at their heart fell to the point at which anyone could afford one, and a new generation of microcomputers stole their novelty for ever. But these machines were by no means the first calculators, and [What Will Makes] shows us in detail the workings of a mechanical calculator.

His machine is beautifully made with gears hand-cut from plywood, and follows a decimal design in which the rotation of a gear with ten teeth represents the numbers 0 to 9. We’re taken through the mechanical processes behind addition, subtraction, multiplication, and division, showing us such intricacies as the carry lever or a sliding display mechanism to implement a decimal equivalent of a bitwise shift multiplication.

We have to admit to be particularly impressed by the quality of the work, more so because these gears are hand made. To get such a complex assembly to work smoothly requires close attention to tolerance, easy with a laser cutter but difficult by hand. We heartily recommend watching the video, which we’ve placed below the break.

Meanwhile if you’d like more mechanical calculators, take a look at one of the final generation of commercial models.

Everyone likes something cheap, and when that cheap thing is a router that’s supported by OpenWRT, it sounds like a win. [Hennung Paul] ordered a Wavlink WL-WN586X3 for the princely sum of 39 Euros, but was disappointed to find his device a rev. 2 board rather than the rev.1 board supported by the Linux distribution. Toss it on the failed projects pile and move on? Not at all, he hacked together a working OpenWRT for the device.

It’s fair to say that a majority of Hackaday readers will  have familiarity with Linux, but that’s something which runs on a sliding scale from “Uses Ubuntu a bit” all the way to “Is at one with the kernel”. We’d rate ourselves somewhere around halfway along that scale in terms of having an in-depth knowledge of userland and a working knowledge of some of the internals which make the operating system tick even if we’re apprehensive about tinkering at that level. [Henning] has no such  limitations, and proceeds to take the manufacturer’s distribution, itself a heavily modified OpenWRT, and make it his own. Booting over tFTP we’re used to, and we’re particularly impressed to see him using a Raspberry Pi as a surrogate host for the desoldered Flash chip over SPI.

It’s a long path he takes to get the thing working and we’re not sure we could follow it all, but we hope that the result will be a new device added to OpenWRT’s already extensive support list. It’s sometimes a shock to find this distro is now over two decades old.

Despite the latest and greatest Intel-derived computers having multi-core 64-bit processors and unimaginably fast peripherals, at heart they all still retain a compatibility that goes back  to the original 8086. This means that they can, in theory at least, still run MS-DOS. The venerable Microsoft 16-bit OS may now be long discontinued, but there is still enough need for DOS that the open-source FreeDOS remains in active development. The Register are here to remind us that there’s another open-source DOS on the block, and that it has a surprising history.

SvarDOS is an open source DOS distribution, and it’s interesting because it uses a derivative of the DR-DOS kernel, an OS which traces its roots back to Digital Research’s CP/M operating system of the 1970s. This found its way briefly into the open source domain courtesy of the notorious Caldera Inc back in the 1990s, and has continued to receive some development effort ever since. As the Reg notes, it has something FreeDOS lacks, the ability to run Windows 3.1 should you ever feel the need. They take it for a spin in the linked article, should you be curious.

It’s something which has surprised us over the years, that aside from the world of retrocomputing we still occasionally find FreeDOS being distributed, usually alongside some kind of hardware maintenance software. Even four decades or more later, it’s still of value to have the simplest of PC operating systems to hand.

It’s worth pointing out that there’s a third open-source DOS in the wild, as back in April Microsoft released MS-DOS version 4 source code. But as anyone who used it will tell you, that version was hardly the pick of the bunch.

Header: Ivan Radic, CC BY 2.0.

There are many retrocomputer emulation projects out there, and given the relative fragility of the original machines as they enter their fifth decade, emulation seems to be the most common way to play 8-bit games. It’s easy enough to load one on your modern computer, but there are plenty of hardware options, too. “The computer we’d have done anything for back in 1983” seems to be a phrase many of them bring to mind, but it’s so appropriate because they keep getting better. Take [Stormbytes1970]’s Pi Pico-powered Sinclair ZX Spectrum mini laptop (Spanish language, Google Translate link), for example. It’s a slightly chunky netbook that’s a ZX Spectrum, and it has a far better keyboard than the original.

On the PCB is the Pico, the power supply circuitry, an SD card, and a speaker. But it’s when the board is flipped over that the interesting stuff starts. In place of the squidgy rubber keyboard of yore, it has a proper keyboard,. We’re not entirely sure which switch it uses, but it appears to be a decent one, nevertheless. The enclosure is a slick 3D-printed sub-netbook for retro gaming on the go. Sadly, it won’t edit Hackaday, so we won’t be slipping one in the pack next time we go on the road, but we like it a lot.

It’s not the first Spectrum laptop we’ve covered, but we think it has upped the ante over the last one. If you just want the Spectrum’s BASIC language experience, you can try a modern version that runs natively on your PC.

Energy harvesting, the practice of scavenging ambient electromagnetic fields, light, or other energy sources, is a fascinating subject that we don’t see enough of here at Hackaday. It’s pleasing then to see [Jeff Keacher]’s Christmas card: it’s a PCB that lights up some LEDs on a Christmas tree, using 2.4 GHz radiation, and ambient light.

The light sensors are a set of LEDs, but the interesting part lies in the RF harvesting circuit. There’s a PCB antenna, a matching network, and then a voltage multiplier using dome RF Schottky diodes. These in turn charge a supercapacitor, but if there’s not enough light a USB power source can also be hooked up. All of this drives a PIC microcontroller, which drives the LEDs.

Why a microcontroller, you ask? This card has an interesting trick up its sleeve, despite having no WiFi of its own, it can be controlled over WiFi. If the 2.4 GHz source comes via proximity to an access point, there’s a web page that can be visited with a script generating packets in bursts that produce a serial pulse train on the DC from the power harvester. The microcontroller can see this, and it works as a remote. This is in our view, next-level.

In our high school chemistry classes we all learn about chirality, the property of organic molecules in which two chemically identical molecules can have different structures that are mirror images of each other. This can lead to their exhibiting different properties, and one aspect of chirality is causing significant concerns in the field of synthetic biology. The prospect of so-called mirror organisms is leading to calls from a group of prominent scientists for research in the field to be curtailed due to the risks they would present.

Chirality is baked into all life; our DNA is formed of right-handed molecules while our proteins are left handed. The “mirror” organisms would reverse either or both of these, and could in theory be used to improve biochemical production processes. The concern is that these organisms would evade both the immune systems of all natural life forms, and any human defences such as antibiotics, thus posing an existential risk to life. It’s estimated that the capacity to produce such a life form lies more than a decade away, and the scientists wish to forestall that by starting the conversation early. They are calling for a halt to research likely to result in these organisms, and a commitment from funding bodies not to support such research.

Warnings of the dangers from scientific advances are as old as science itself, and it’s safe to say that many such prophecies have come from dubious sources and proved not to have a basis in fact. But this one, given the body of opinion behind it, is perhaps one that should be heeded.

Header: Original: Unknown Vector: — πϵρήλιο, Public domain.

The web browser started life as a relatively simple hypertext reading application, but over the 30+ years since the first one displayed a simple CERN web page it has been extended to become the universal platform. It’s now powerful enough to run demanding applications, for example a full software-defined radio. [Jtarrio] proves this, with an application to use an RTL-SDR, in HTML5.

It’s a fork of a previous Google-Chrome-only FM receiver, using the HTML5 WebUSB API, and converted to TypeScript. You can try it out for yourself if you have a handy RTL dongle lying around, it provides an interface similar to the RTL apps you may be used to.

The Realtek digital TV chipset has been used as an SDR for well over a decade now, so we’re guessing most of you with an interest in radio will have one somewhere. The cheap ones are noisy and full of spurious peaks, but even so, they’re a bucket of fun. Now all that’s needed is the transmit equivalent using a cheap VGA adapter, and the whole radio equation could move into the browser.

As a British taxpayer it’s reassuring to know that over in Cheltenham there’s a big round building full of people dedicated to keeping us safe. GCHQ is the nation’s electronic spying centre, and just to show what a bunch of good eggs they are they release a puzzler every year to titillate the nation’s geeks. 2024’s edition is out if you fancy trying it, so break out your proverbial thinking caps.

The puzzle comes in several stages each of which reveals a British landmark, and we’re told there’s a further set of puzzles hidden in the design of the card itself. We know that Hackaday readers possess fine minds, so you’ll all be raring to have a go.

Sadly GCHQ would for perfectly understandable reasons never let Hackaday in for a tour, but we’ve encountered some of their past work. First the Colossus replica codebreaking computer at Bletchley Park was the progenitor of the organisation, and then a few years ago when they had an exhibition from their archive in the London Science Museum.

The process of ironmaking has relied for centuries on iron ore, an impure form of iron oxide, slowly being reduced to iron by carbon monoxide in a furnace. Whether that furnace is the charcoal fire of an Iron Age craftsman or a modern blast furnace, the fundamental process remains the same, even if the technology around it has been refined. Now details are emerging of a new take on iron smelting from China, which turns what has always been a slow and intensive process into one that only takes a few seconds. So-called flash ironmaking relies on the injection of a fine iron ore powder into a superheated furnace, with the reduction happening explosively and delivering a constant stream of molten iron.

Frustratingly there is little detail on how it works, with the primary source for the news coverage being a paywalled South China Morning Post article. The journal article alluded to has proved frustratingly difficult to find online, leaving us with a few questions as to how it all works. Is the reducing agent still carbon monoxide, for example, or do they use another one such as hydrogen? The interesting part from an economic perspective is that it’s said to work on lower-grade ores, opening up the prospect for the Chinese steelmakers relying less on imports. There’s no work though on how the process would deal with the inevitable slag such ore would create.

If any readers have journal access we’d be interested in some insight in the comments, and we’re sure this story will deliver fresh information over time. Having been part of building a blast furnace of our own in the past, it’s something we find interesting

Ah, the 1990s. It was a simpler time, when the web was going to be democratic and decentralised, you could connect your Windows 95 PC to the internet without worrying much about it being compromised, and freely download those rave music MP3s. Perhaps you had a Global Hypercolor T-shirt and spent a summer looking like the sweaty idiot you were, and it’s certain you desperately squinted at a magic eye image in a newspaper (remember newspapers?) trying to see the elephant or whatever it was. If you’d like to relive that experience, then [Dave Richeson] has a magic eye image generator for Microsoft Excel.

Unfortunately a proportion of the population including your scribe lack the ability to see these images, a seemingly noise-like pattern of dots on the page computationally generated to fool the visual processing portion of your brain to generate a 3D image. The Excel sheet allows you to create the images, but perhaps most interesting is the explanation of the phenomenon and mathematics which go along with it. Along with a set of test images depicting mathematical subjects, it’s definitely worth a look.

You can download a template and follow the instructions, and from very limited testing here we can see that LibreOffice doesn’t turn its nose up at it, either. Give it a go, and learn afresh the annoyance of trying to unfocus your eyes.