The hits just keep coming for the International Space Station (ISS), literally in the case of a resupply mission scheduled for June that is now scrubbed thanks to a heavy equipment incident that damaged the cargo spacecraft. The shipping container for the Cygnus automated cargo ship NG-22 apparently picked up some damage in transit from Northrop Grumman’s Redondo Beach plant in Los Angeles to Florida. Engineers inspected the Cygnus and found that whatever had damaged the container had also damaged the spacecraft, leading to the June mission’s scrub.

Mission controllers are hopeful that NG-22 can be patched up enough for a future resupply mission, but that doesn’t help the ISS right now, which is said to be running low on consumables. To fix that, the next scheduled resupply mission, a SpaceX Cargo Dragon slated for an April launch, will be modified to include more food and consumables for the ISS crew. That’s great, but it might raise another problem: garbage. Unlike the reusable Cargo Dragons, the Cygnus cargo modules are expendable, which makes them a great way to dispose of the trash produced by the ISS crew since everything just burns up on reentry. The earliest a Cygnus is scheduled to dock at the ISS again is sometime in this autumn, meaning it might be a long, stinky summer for the crew.

By now you’ve probably heard the news that genetic testing company 23andMe has filed for bankruptcy. The company spent years hawking their spit-in-a-tube testing kits, which after DNA sequence analysis returned a report revealing all your genetic secrets. This led to a lot of DNA surprises, like finding a whole mess of half-siblings, learning that your kid isn’t really related to you, and even catching an alleged murderer. But now that a bankruptcy judge has given permission for the company to sell that treasure trove of genetic data to the highest bidder, there’s a mad rush of 23andMe customers to delete their data. It’s supposed to be as easy as signing into your account and clicking a few buttons to delete your data permanently, with the option to have any preserved samples destroyed as well. Color us skeptical, though, that the company would willingly allow its single most valuable asset to be drained. Indeed, there were reports of the 23andMe website crashing on Monday, probably simply because of the rush of deletion requests, but then again, maybe not.

It may not have been 121 gigawatts-worth, but the tiny sample of plutonium that a hapless Sydney “science nerd” procured may be enough to earn him some jail time. Emmanuel Lidden, 24, pleaded guilty to violations of Australia’s nuclear proliferation laws after ordering a small sample of the metal from a US supplier, as part of his laudable bid to collect a sample of every element in the periodic table. Shipping plutonium to Australia is apparently a big no-no, but not so much that the border force officials who initially seized the shipment didn’t return some of the material to Lidden. Someone must have realized they made a mistake, judging by the outsized response to re-seize the material, which included shutting down the street where his parents live and a lot of people milling about in hazmat suits. We Googled around very briefly for plutonium samples for sale, which is just another in a long list of searches since joining Hackaday that no doubt lands us on a list, and found this small chunk of trinitite encased in an acrylic cube for $100. We really hope this isn’t what the Australian authorities got so exercised about that Lidden now faces ten years in prison. That would be really embarrassing.

And finally, we couldn’t begin to tote up the many happy hours of our youth spent building plastic models. New model day was always the best day, and although it’s been a while since we’ve indulged, we’d really get a kick out of building models of some of the cars we had an emotional connection to, like the 1972 Volkswagen Beetle that took us on many high school adventures, or our beloved 1986 Toyota 4×4 pickup with the amazing 22R engine. Sadly, those always seemed to be vehicles that wouldn’t appeal to a broad enough market to make it worth a model company’s while to mass-produce. But if you’re lucky, the car of your dreams might just be available as a download thanks to the work of Andrey Bezrodny, who has created quite a collection of 3D models of off-beat and quirky vehicles. Most of the files are pretty reasonably priced considering the work that obviously went into them, and all you have to do is download the files and print them up. It’s not quite the same experience as taking the shrink-wrap off a Revell or Monogram box and freeing the plastic parts from they’re trees to glue them together, but it still looks like a lot of fun.

Ever want to get into reverse engineering but don’t know where to start? You’re in luck — [Hash] just dropped a case study in chip glitching that should get you off on the right foot.

The object of this reverse engineering effort in the video below is a Microchip SAM4C32C, removed from one of the many smart electrical meters [Hash] loves to tear into. This microcontroller was supposed to be locked to prevent anyone from sniffing around in the code, but after soldering the chip to a target board and plugging it into a Chip Whisperer, [Hash] was able to find some odd-looking traces on the oscilloscope. Of particular interest was an unusual pattern on the scope while resetting the chip, which led him to an AI-assisted search for potential vulnerabilities. This allowed him to narrow down the target time for a power glitch, and in only a few seconds, the chip was forced to bypass its security bit and drop into its boot loader. With the keys to the kingdom, [Hash] was able to read the firmware and find all sorts of interesting tidbits.

Obviously, chip glitching isn’t always as easy as this, and even when a manufacturer leaves a vector like this in the chip, exploiting it does take some experience and finesse. But, if you’re going to get started glitching, it makes sense to start with the low-hanging fruit, and having [Hash] along for the ride doesn’t hurt either.

Tektronix must have been quite a place to work back in the 1980s. The company offered a bewildering selection of test equipment, and while the digital age was creeping in, much of their gear was still firmly rooted in the analog world. And some of the engineering tricks the Tek wizards pulled off are still the stuff of legend.

One such gem of analog design was the SG505, an ultra-low-distortion oscillator module that [Paul] is trying to replicate with modern parts. That’s a tall order since not only did the original specs on this oscillator call for less than 0.0008% total harmonic distortion over a frequency range of 20 Hz to 20 kHz, but a lot of the components it used are no longer manufactured. Tek also tended to use a lot of custom parts, especially mechanical ones like the barrel switch used to select attenuation levels in the SG505, leaving [Paul] no choice but to engineer his way around them.

So far, [Paul] has managed to track down most of the critical components or source suitable substitutes. One major win was locating the original J-FET Tek used in the oscillator’s AGC circuit. One part that’s proven more elusive is the potentiometer that Tek used to adjust the frequency; who knew that finding a dual-gang precision wirewound 10k single-turn pot with no physical stop would be such a chore?

[Paul] still seems to be very much in the planning stages of this project yet, and that’s probably for the best since projects such as these live and die on proper planning. We’re keen to see how this develops, and we’re very much looking forward to seeing the FFT results. We also imagine he’ll be busting out his custom curve tracer at some point in the build, too.

Around these parts, projects needlessly using a microcontroller where a simpler design would do are often derided with the catch-all “Should have used a 555,” even if the venerable timer chip wouldn’t have been the ideal solution. But the sentiment stands that a solution more complicated than it needs to be is probably one that needs rethinking, as this completely mechanical chaser light badge Simple Add-On (SAO) aptly demonstrates.

Rather than choosing any number of circuits to turn a strip of discrete lights on and off, [Johannes] took inspiration for his chaser lights from factory automation mechanisms that move parts between levels on steps that move out of phase with each other, similar to the marble-raising mechanism used in [Wintergatan]’s Marble Machine X.

Two thin plates with notches around the edge are sandwiched together inside the 3D printed case of the SAO, between the face and the light source. A small motor and a series of gears rotate the two masks 180° out of phase with each other, which creates the illusion that the light is moving.

It’s pretty convincing; when we first saw the video below, we were sure it was a row of tiny LEDs around the edge of the badge.

Hats off to [Johannes] for coming up with such a clever mechanism and getting it working just in time for Hackaday Europe. If you need to catch up on the talks, we’ve got a playlist ready for you.

Those who indulge in trading card games know that building the best deck is the key to victory. What exactly that entails is a mystery to us muggles, but keeping track of your cards is a vital part of the process, one that this DIY card scanner (original German; English translation) seeks to automate.

At its heart, [Fraens]’ card scanner is all about paper handling, which is always an engineering task fraught with peril. Cards like those for Magic: The Gathering and other TCGs are meant to be handled by human hands, and automating the task of flipping through them presents some challenges. [Fraens] uses a pair of motorized 3D-printed rollers with O-rings to form a conveyor belt that can pull one card at a time off the bottom of a deck. An adjustable retaining roller made from the most adorable linear bearing we’ve ever seen ensures that only one card at a time is pulled from the hopper onto an imaging platen. An adjustable mount holds a smartphone to take a picture of the card, which is fed into an app that extracts all the details and categorizes the cards in the deck.

Aside from the card handling mechanism, there are some pretty slick details to this build. The first is that [Fraens] noticed that the glossy finish on some cards interfered with scanning, leading him to add a diffused LED ringlight to the rig. If an image isn’t scannable, the light goes through a process of dimming and switching colors until a good scan is achieved. Also, to avoid the need to modify the existing TCG deck management app, [Fraens] added a microphone to the control side of the scanner that listens for the sounds the app makes when it scans cards. And if Magic isn’t your thing, the basic mechanism could easily be modified to scan everything from business cards to old family photos.

A moment’s inattention is all it takes to gather the information needed to make a physical copy of a key. It’s not necessarily an easy process, though, so if pen testing is your game, something like this Flipper Zero key copying toolchain can make the process quicker and easier when the opportunity presents itself.

Of course, we’re not advocating for any illegal here; this is just another tool for your lock-sports bag of tricks. And yes, there are plenty of other ways to accomplish this, but using a Flipper Zero to attack a strictly mechanical lock is kind of neat. The toolchain posted by [No-Lock216] starts with an app called KeyCopier, which draws a virtual key blank on the Flipper Zero screen. The app allows you to move the baseline for each pin to the proper depth, quickly recording the bitting for the key. Later, the bitting can be entered into an online app called keygen which, along with information on the brand of lock and its warding, can produce an STL file suitable for downloading and printing.

Again, there are a ton of ways to make a copy of a key if you have physical access to it, and the comments of the original Reddit post were filled with suggestions amusingly missing the entire point of this. Yes, you can get a key cut at any hardware store for a buck or two that will obviously last a lot longer than a 3D-printed copy. But if you only have a few seconds to gather the data from the key, an app like KeyCopier could be really convenient. Personally, we’d find a smartphone app handier, but if you’ve got a Flipper, why not leverage it?

Thanks to [JohnU] for the tip.

What a long, strange trip it’s been for NASA astronauts Suni Williams and Bruce Wilmore, who finally completed their eight-day jaunt to space after 289 days. The duo returned to Earth from the ISS on Tuesday along with two other returning astronauts in a picture-perfect splashdown, complete with a dolphin-welcoming committee. For the benefit of those living under rocks these past nine months, Williams and Wilmore slipped the surly bonds way back in June on the first crewed test flight of the Boeing Starliner, bound for a short stay on the ISS before a planned return in the same spacecraft. Alas, all did not go to plan as their ride developed some mechanical difficulties on the way upstairs, and so rather than risk their lives on a return in a questionable capsule, NASA had them cool their heels for a couple of months while Starliner headed home without them.

There’s been a lot of talk about how Butch and Suni were “stranded,” but that doesn’t seem fair to us. Sure, their stay on the ISS was unplanned, or at least it wasn’t Plan A; we’re sure this is always a contingency NASA allows for when planning missions. Also unfortunate is the fact that they didn’t get paid overtime for the stay, not that you’d expect they would. But on the other hand, if you’re going to get stuck on a work trip, it might as well be at the world’s most exclusive and expensive resort.

Speaking of space, while it’s statistically unlikely that anyone reading this will ever get there, you can still get a little taste of what space travel is like if you’re willing to give up ten days of your life to lie in a waterbed. What’s more, the European Space Agency will pay you 5,000 euros to do it. The experiment is part of the ESA’s Vivaldi III campaign, an exploration of the effects of extended spaceflight on the human body. The “waterbed” thing is a little misleading, though; since the setup is designed to simulate the posture the body takes in microgravity, they use a tank of water (heated, we hope) with a waterproof cover to submerge volunteers up to their torso. This neutral body posture looks pretty comfortable if you’re sleeping in space, but we tend to think it’d get annoying pretty quickly down here. Especially for potty breaks, which aren’t done astronaut-style but rather by being transferred to a trolley which lets you do your business without breaking from the neutral posture. Still, 5,000 euros is 5,000 euros.

Bad news for the meme-making community, as it appears AI might be coming for you, too. A recent study found that LLMs like ChatGPT can meme better than humans, at least under certain conditions. To come to that conclusion, researchers used some pretty dank meme templates and pitted humans against ChatGPT-4o to come up with meme-worthy captions. They also had a different group of humans collaborate with the LLM to come up with meme captions, which for practical purposes probably means the humans let the chatbot do the heavy lifting and just filtered out the real stinkers. When they showed the memes to crowdsourced participants to rate them on humor, creativity, and shareability, they found that the LLM consistently produced memes that scored higher across all three categories. This makes sense when you think about it; the whole job of an LLM is to look at a bunch of words and come up with a consensus on what the next word should be. Happily, the funniest memes were written by humans, and the human-LLM collaborations were judged more creative and shareable. So we’ve got that going for us, which is good.

We noted the passing of quite a few surplus electronics shops in this space before, and the closing of each of them, understandable as they may, marks the end of an era. But we recently learned about one surplus outfit that’s still going strong. Best Electronics, which specializes in Atari retrocomputing, has been going strong for over 40 years, a neat trick when Atari itself went bankrupt over 30 years ago. While they appear to have a lot of new old stock bits and bobs — they’re said to have acquired “thousands and thousands” of pallets of Atari goods from their Sunnyvale warehouse when the company folded — they also claim to spend a lot of money on engineering development. Their online presence is delightfully Web 1.0, making it pretty hard to sort through, but we think that development is mainly upgraded PCBs for things like joysticks and keyboards. Whatever they’re doing, they should just keep on doing it.

And finally, have you ever seen a knitted breadboard? Now you have, and while it’s of no practical value, we still love it. Alanna Okun made it for the ITP Stupid Hackathon at NYU back in February. There aren’t any instructions or build docs, so it’s not clear how it works, but from the photos we’d guess there’s either conductive yarn or solid copper wire knitted into the pattern to serve as bus bars.

The difference between 3D printing and good 3D printing comes down to attention to detail. There are so many settings and so many variables, each of which seems to impact the other to a degree that can make setting things up a maddening process. That makes anything that simplifies the process, such as this computer vision pressure advance attachment, a welcome addition to the printing toolchain.

If you haven’t run into the term “pressure advance” for FDM printing before, fear not; it’s pretty intuitive. It’s just a way to compensate for the elasticity of the molten plastic column in the extruder, which can cause variations in the amount of material deposited when the print head acceleration changes, such as at corners or when starting a new layer.

To automate his pressure advance calibration process, [Marius Wachtler] attached one of those dirt-cheap endoscope cameras to the print head of his modified Ender 3, pointing straight down and square with the bed. A test grid is printed in a corner of the bed, with each arm printed using a slightly different pressure advance setting. The camera takes a photo of the pattern, which is processed by computer vision to remove the background and measure the thickness of each line. The line with the least variation wins, and the pressure advance setting used to print that line is used for the rest of the print — no blubs, no blebs.

We’ve seen other pressure-advanced calibrators before, but we like this one because it seems so cheap and easy to put together. True, it does mean sending images off to the cloud for analysis, but that seems a small price to pay for the convenience. And [Marius] is hopeful that he’ll be able to run the model locally at some point; we’re looking forward to that.

There’s a classic grade school science experiment that involves extracting juice from red cabbage leaves and using it as a pH indicator. It relies on anthocyanins, pigmented compounds that give the cabbage its vibrant color but can change depending on the acidity of the environment they’re in, from pink in acidic conditions to green at higher pH. And anthocyanins are exactly what power this unusual kinetic art piece.

Even before it goes into action, [Nathalie Gebert]’s Anthofluid is pretty cool to look at. The “canvas” of the piece is a thin chamber formed by plexiglass sheets, one of which is perforated by an array of electrodes. A quartet of peristaltic pumps fills the chamber with a solution of red cabbage juice from a large reservoir, itself a mesmerizing process as the purple fluid meanders between the walls of the chamber and snakes around and between the electrodes. Once the chamber is full, an X-Y gantry behind the rear wall moves to a random set of electrodes, deploying a pair of conductors to complete the circuit. When a current is applied, tendrils of green and red appear, not by a pH change but rather by the oxidation and reduction reactions occurring at the positive and negative electrodes. The colors gently waft up through the pale purple solution before fading away into nothingness. Check out the video below for the very cool results.

We find Anthofluid terribly creative, especially in the use of such an unusual medium as red cabbage juice. We also appreciate the collision of chemistry, electricity, and mechatronics to make a piece of art that’s so kinetic but also so relaxing at the same time. It’s the same feeling that [Nathalie]’s previous art piece gave us as it created images on screens of moving thread.

Here at Hackaday, it’s a pretty safe bet that putting “World’s smallest” in the title of an article will instantly attract comments claiming that someone else built a far smaller version of the same thing. But that’s OK, because if there’s something smaller than this nearly microscopic LED blinky build, we definitely want to know about it.

The reason behind [Mike Roller]’s build is simple: he wanted to build something smaller than the previous smallest blinky. The 3.2-mm x 2.5-mm footprint of that effort is a tough act to follow, but technology has advanced somewhat in the last seven years, and [Mike] took advantage of that by basing his design on an ATtiny20 microcontroller in a WLCSP package and an 0201 LED, along with a current-limiting resistor and a decoupling capacitor. Powering the project is a 220-μF tantalum capacitor, which at a relatively whopping 3.2 mm x 1.6 mm determines the size of the PCB, which [Mike] insisted on using.

Assembling the project was challenging, to say the least. [Mike] originally tried a laboratory hot plate to reflow the board, but when the magnetic stirrer played havoc with the parts, he switched to a hot-air rework station with a very low airflow. Programming the microcontroller almost seemed like it was more of a challenge; when the pogo pins he was planning to use proved too large for the job he tacked leads made from 38-gauge magnet wire to the board with the aid of a micro hot air tool.

After building version one, [Mike] realized that even smaller components were available, so there’s now a 2.4 mm x 1.5 mm version using an 01005 LED. We suspect there’ll be a version 3.0 soon, though — he mentions that the new TI ultra-small microcontrollers weren’t available yet when he pulled this off, and no doubt he’ll want to take a stab at this again.

“The brickings will continue until the printer sales improve!” This whole printer-bricking thing seems to be getting out of hand with the news this week that a firmware update caused certain HP printers to go into permanent paper-saver mode. The update was sent to LaserJet MFP M232-M237 models (opens printer menu; checks print queue name; “Phew!) on March 4, and was listed as covering a few “general improvements and bug fixes,” none of which seem very critical. Still, some users reported not being able to print at all after the update, with an error message suggesting printing was being blocked thanks to non-OEM toner. This sounds somewhat similar to the bricked Brother printers we reported on last week (third paragraph).

The trouble is, some users are reporting the problem even if they had genuine HP toner installed. Disturbingly, HP support seems to be fine with this, saying that older HP toner “may no longer be recognized due to new security measures.” Well, there’s your problem, lady! The fix, of course, is to buy yet more genuine HP toner, even if your current cartridge still has plenty of life left in it. That’s a pretty deplorable attitude on HP’s part, and more than enough reason to disable automatic firmware updates, or better yet, just disconnect your printer from the Internet altogether.

Here’s a pro-tip for all you frustrated coders out there: no matter how hard the job gets, planting a logic bomb in your code is probably not the right way to go. That’s the lesson that one Davis Lu learned after being convicted of “causing intentional damage to protected computers” thanks to malicious code he planted in his employer’s system. Apparently not optimistic about his future prospects with Eaton Corp. back in 2018, Lu started adding code designed to run a series of infinite loops to delete user profiles. He also went for the nuclear option, adding code to shut the whole system down should it fail to find an Active Directory entry for him. That code was apparently triggered on the day he was fired in 2019, causing global problems for his former employer. Look, we’ve all been there; coding is often lonely work, and it’s easy to fantasize about coding up something like this and watching them squirm once they fire you. But if it gets that bad, you should probably put that effort into finding a new gig.

Then again, maybe the reason you’re dissatisfied with your coding job is that you know some smart-ass LLM is out there waiting to tell you that you don’t know how to code. That’s what happened to one newbie Cursor user who tried to get help writing some video game code from the AI code editor. The LLM spat back about 750 lines of code but refused to reveal the rest, and when he asked to explain why, it suggested that he should develop the logic himself so that he’d be able to understand and maintain the code, and that “Generating code for others can lead to dependency and reduced learning opportunities.” True enough, but do we really need our AI tools to cop an attitude?

And finally, if you’re anything like us, you’re really going to love this walking tour of a container ship’s mechanical spaces. The ship isn’t named, but a little sleuthing suggests it’s one of the Gülsün-class ships built for MSC in 2019, possibly the MSC Mina, but that’s just a guess. This 400-meter monster can carry 23,656 twenty-foot equivalent units, and everything about it is big. Mercifully, the tour isn’t narrated, not that it would have been possible, thanks to the screaming equipment in the engine room. There are captions, though, so you’ll at least have some idea of what you’re looking at in the immaculately clean and cavernously huge spaces. Seriously, the main engine room has to have at least a dozen floors; being on the engineering crew must mean getting your steps in every day. The most striking thing about the tour was that not a single other human being was visible during the entire hour. We suppose that’s just a testament to how automated modern vessels have become, but it still had a wonderfully creepy liminal feeling to it. Enjoy!

From the styling of this article’s title, some might assume that the Hackaday editors are asleep at the switch this fine day. While that might be true — it’s not our turn to watch them — others will recognize this tortured phrasing as one way to use the 1,000 most commonly used words in the English language to describe a difficult technical project, such as [Attoparsec]’s enormous and enormously impractical ten-hundred word keyboard.

While the scale of this build is overwhelming enough, the fact that each key delivers a full word rather than a single character kind of throws the whole keyboard concept out the window. The 60×17 matrix supports the 1,000 most common English words along with 20 modifier keys, which allow a little bit of cheating on the 1-kiloword dictionary by letting you pluralize a word or turn it into an adjective or adverb. Added complexity comes from the practical limits of PCB fabrication, which forces the use of smaller (but still quite large) PCBs that are connected together. Luckily, [Attoparsec] was able to fit the whole thing on five identical PCBs, which were linked together with card-edge connectors.

The list of pain points on this six-month project is long, and the video below covers them all in detail. What really stood out to us, though, was the effort [Attoparsec] put into the keycaps. Rather than 3D printing his own, he used dye sublimation to label blank keycaps with the 1,000 words. That might sound simple, but he had to go through a lot of trial and error before getting a process that worked, and the results are quite nice. Another problem was keeping the key switches aligned while soldering, which was solved with a 3D printed jig. We also appreciate the custom case to keep this keyboard intact while traveling; we’re going to keep that build-your-own road case service in mind for future projects.

This mega-keyboard is a significant escalation from [Attoparsec]’s previous large keyboard project. The results are pretty ridiculous and impractical, but that’s just making us love it more. The abundance of tips and tricks for managing a physically expansive project are just icing on the cake.

Have you seen Severance? Chances are good that you have; the TV series has become wildly popular in its second season, to the point where the fandom’s dedication is difficult to distinguish from the in-universe cult of [Kier]. Part of the show’s appeal comes from its overall aesthetic, which is captured in this description of the building of one of the show’s props.

A detailed recap of the show is impossible, but for the uninitiated, a mega-corporation called Lumon has developed a chip that certain workers have implanted in their brains to sever their personalities and memories into work and non-work halves. The working “Innies” have no memory of what their “Outies” do when they aren’t at work, which sounds a lot better than it actually ends up being. It’s as weird as it sounds, and then some.

The prop featured here is the “WoeMeter” from episode seven of season two, used to quantify the amount of woe in a severed worker — told you it was weird. The prop was built by design house [make3] on a short timeline and after seeing only some sketches and rough renders from the production designers, and had to echo the not-quite-midcentury modern look of the whole series. The builders took inspiration from, among other things, a classic Nagra tape recorder, going so far as to harvest its knobs and switches to use in the build. The controls are all functional and laid out in a sensible way, allowing the actors to use the device in a convincing way. For visual feedback, the prop has two servo-operated meters and a string of seven-segment LED displays, all controlled by an ESP-32 mounted to a custom PCB. Adding the Lumon logo to the silkscreen was a nice touch.

The prop maker’s art is fascinating, and the ability to let your imagination run wild while making something that looks good and works for the production has got to be a blast. [make3] really nailed it with this one.

Thanks to [Aaron’s Outie] for the tip.

If you were one of the earliest of early adopters in the home computing revolution, you might have had to settle for paper tape mass storage. It was slow, it was bulky, but it was what you had, and that gave it a certain charm that’s hard to resist. And that charm is what [Joshua Coleman] captures with this DIY paper tape reader build.

If the overall style of this project looks familiar, it’s because it was meant to echo the design themes from [Joshua]’s Coleman Z-80 modular computer. The electronics of the reader are based on [David Hansel]’s take on a paper tape reader, which in turn was meant to complement his Altair 8080 simulator — it’s retrocomputers all the way down! [Joshua]’s build has a few bells and whistles to set it apart, though, including an adjustable read head, parametric 3D-printed reels, and a panel mounted ammeter, just because. He also set it up to be a sort of keyboard wedge thanks to an internal relay that bypasses the reader unless it’s actually playing back a tape. Playback speed is pretty fast; see the video below for details.

So far, writing the tapes is an offline process. [Joshua] uses a Python program to convert ASCII to an SVG file and uses a laser cutter to burn holes in lengths of paper, which are then connected together to form a longer tape. A logical next step might be to build a feeder that moves a paper tape across the bed of the laser cutter in sync with the conversion program, to create continuous paper tapes. Or, there’s always the old-school route of solenoid-powered punch and die. We’d be thrilled with either.

It’s been a busy week in space news, and very little of it was good. We’ll start with the one winner of the week, Firefly’s Blue Ghost Mission 1, which landed successfully on the Moon’s surface on March 2. The lander is part of NASA’s Commercial Lunar Payload Services program and carries ten scientific payloads, including a GPS/GNSS receiver that successfully tracked signals from Earth-orbiting satellites. All of the scientific payloads have completed their missions, which is good because the lander isn’t designed to withstand the long, cold lunar night only a few days away. The landing makes Firefly the first commercial outfit to successfully soft-land something on the Moon, and being the first at anything is always a big deal.

Slightly less impressive was Intuitive Machines’ attempt at a landing a day later. Their NOVA-C robotic lander Athena managed a somewhat controlled landing, but the spacecraft is lying on its side rather than upright, a surprisingly common failure mode for recent lunar landings. Also in the failure category is the loss of the world’s first private asteroid mining mission, as well as SpaceX Starship test flight 8, which ended in spectacular fashion this week as Starship exploded soon after booster separation. As usual, Scott Manley has the best analysis of the incident, which seemed to involve a fire in the engine bay that led to a rapid loss of thrust from four of its six engines, and sent the spacecraft tumbling before tearing itself apart. The only good news from the flight was the third successful catch of the returning booster by the chopsticks, which just never gets old.

What does get old is stories about printer manufacturers and their anti-consumer hijinks, especially when it involves one of the only manufacturers who wasn’t playing the “buy our consumables or we brick it” game. In addition to just about every other printer maker, Brother now stands accused of sending firmware up to printers that turns off functionality if non-OEM cartridges are used. The accusations come from Louis Rossman, well-known for his right-to-repair advocacy and, ironically, long-time proponent of Brother printers as least likely to be bricked. His accusation that “Brother is now among the rest of them” is based on a pretty small sample of affected users, and a self-selected one at that, so take that with the requisite amount of salt. For their part, Brother denies the claim, stating simply that “Brother firmware updates do not block the use of third-party ink in our machines.” They don’t go much beyond that by way of an explanation of what’s happening to the users reporting problems other than to say that the users may be confused by the fact that “we like to troubleshoot with Brother Genuine supplies.” What the real story is is anyone’s guess at this point, and the best advice we can offer is either to avoid printers altogether, or just buy the cheapest one you can get and harvest it for parts once the starter cartridges are empty.

If like us you’ve accumulated a large collection of physical media films and TV shows to while away the long dark days of a post-apocalyptic nightmare where Netflix and Hulu are but a distant memory, you might want to rethink your strategy. Some DVD aficionados have found a troubling trend with “DVD rot,” especially with discs manufactured by Warner Brothers Discovery between 2006 and 2008. It’s not clear what’s going on, but it looks like the polycarbonate cover is delaminating from the inner Mylar layer, resulting in cloudy areas that obscure the data. Warner is aware of the problem and will replace defective discs with the same title if possible, or exchange it for a title of like value if the original is no longer available. We’re dismayed that this defect probably includes our beloved Looney Tunes collection, but on the upside, now we have an excuse to sit through forty straight hours of cartoons.

And finally, if you were a NASA rocket engineer in the 1960s, skipping leg day wasn’t an option. That’s because the Saturn V full-stack shake test on the Apollo program was a very hands-on feet-on process. The shake test was performed to make sure nothing was loose on the stack, and that it would be able to withstand not only the shaking induced by those five massive F-1 engines, but also the occasional hurricane that Florida is famous for. To get the rocket shaking, engineers sat on the deck of the gantry with their legs bridging the gap and their feet up against the side of the service module and gave it all they had. Other engineers literally backed them up, to provide something to push against, while another team on the uppermost platform used a rope to play tug-of-war with the command module. They were able to get the stack moving pretty good, with a meter or so of deflection at the escape tower. It does raise the question, though: what would they have done if the test failed?

The late 1950s were such an optimistic time in America. World War II had been over for less than a decade, the economy boomed thanks to pent-up demand after years of privation, and everyone was having babies — so many babies. The sky was the limit, especially with new technologies that promised a future filled with miracles, including abundant nuclear power that would be “too cheap to meter.”

It didn’t quite turn out that way, of course, but the whole “Atoms for Peace” thing did provide the foundation for a lot of innovations that we still benefit from to this day. This 1958 film on “The Armour Research Reactor” details the construction and operation of the world’s first privately owned research reactor. Built at the Illinois Institute of Technology by Atomics International, the reactor was a 50,000-watt aqueous-homogenous design using a solution of uranyl sulfate in distilled water as its fuel. The core is tiny, about a foot in diameter, and assembled by hand right in front of the camera. The stainless steel sphere is filled with 90 feet (27 meters) of stainless tubing to circulate cooling water through the core. Machined graphite reflector blocks surrounded the core and its fuel overflow tank (!) before the reactor was installed in “biological shielding” made from super-dense iron ore concrete with walls 5 feet (1.5 m) thick — just a few of the many advanced safety precautions taken “to ensure completely safe operation in densely populated areas.”

While the reactor design is interesting enough, the control panels and instrumentation are what really caught our eye. The Fallout vibe is strong, including the fact that the controls are all right in the room with the reactor. This allows technicians equipped with their Cutie Pie meters to insert samples into irradiation tubes, some of which penetrate directly into the heart of the core, where neutron flux is highest. Experiments included the creation of radioactive organic compounds for polymer research, radiation hardening of those new-fangled transistors, and manufacturing radionuclides for the diagnosis and treatment of diseases.

This mid-century technological gem might look a little sketchy to modern eyes, but the Armour Research Reactor had a long career. It was in operation until 1967 and decommissioned in 1972, and similar reactors were installed in universities and private facilities all over the world. Most of them are gone now, though, with only five aqueous-homogenous reactors left operating today.

There’s been a lot of buzz about Meshtastic lately, and with good reason. The low-power LoRa-based network has a ton of interesting use cases, and as with any mesh network, the more nodes there are, the better it works for everyone. That’s why we’re excited by this super-affordable Meshtastic kit that lets you get a node on the air for about ten bucks.

The diminutive kit, which consists of a microcontroller and a LoRa module, has actually been available from the usual outlets for a while. But [concretedog] has been deep in the Meshtastic weeds lately, and decided to review its pros and cons. Setup starts with flashing Meshtastic to the XIAO ESP32-S3 microcontroller and connecting the included BLE antenna. After that, the Wio-SX1262 LoRa module is snapped to the microcontroller board via surface-mount connectors, and a separate LoRa antenna is connected. Flash the firmware (this combo is supported by the official web flasher), and you’re good to go.

What do you do with your new node? That’s largely up to you, of course. Most Meshtastic users seem content to send encrypted text messages back and forth, but as our own [Jonathan Bennett] notes, a Meshtastic network could be extremely useful for emergency preparedness. Build a few of these nodes, slap them in a 3D printed box, distribute them to willing neighbors, and suddenly you’ve got a way to keep connected in an emergency, no license required.

Just about any 3D printer can be satisfying to watch as it works, but delta-style printers are especially hypnotic. There’s just something about the way that three linear motions add up to all kinds of complex shapes; it’s mesmerizing. Deltas aren’t without their problems, though, which led [Bruno Schwander] to undertake a trio of interesting mods on his Anycubic Kossel.

First up was an effort to reduce the mass of the business end of the printer, which can help positional accuracy and repeatability. This started with replacing the stock hot-end with a smaller, lighter MQ Mozzie, but that led to cooling problems that [Bruno] addressed with a ridiculously overpowered brushless hairdryer fan. The fan expects a 0 to 5-VDC signal for the BLDC controller, which meant he had to build an adapter to allow Marlin’s 12-volt PWM signal to control the fan.

Once the beast of a fan was tamed, [Bruno] came up with a clever remote mount for it. A 3D-printed shroud allowed him to mount the fan and adapter to the frame of the printer, with a flexible duct connecting it to the hot-end. The duct is made from lightweight nylon fabric with elastic material sewn into it to keep it from taut as the printhead moves around, looking a bit like an elephant’s trunk.

Finally, to solve his pet peeve of setting up and using the stock Z-probe, [Bruno] turned the entire print bed into a strain-gauge sensor. This took some doing, which the blog post details nicely, but it required building a composite spacer ring for the glass print bed to mount twelve strain gauges that are read by the venerable HX711 amplifier and an Arduino, which sends a signal to Marlin when the head touches the bed. The video below shows it and the remote fan in action.

The current generation of USB-powered soldering irons have a lot going for them, chief among them being portability and automatic start and stop. But an iron that turns off in the middle of soldering a joint is a problem, one that this capacitive-touch replacement control module aims to fix.

The iron in question is an SJ1 from Awgem, which [DoganM95] picked up on Ali Express. It seems well-built, with a sturdy aluminum handle, a nice OLED display, and fast heat-up and cool-down. The problem is that the iron is triggered by motion, so if you leave it still for more than a second or two, such as when you’re soldering a big joint, it turns itself off. To fix that,[DoganM95] designed a piggyback board for the OEM controller with a TTP223 capacitive touch sensor. The board is carefully shaped to allow clearance for the existing PCB components and the heater cartridge terminals, and has castellated connections so it can connect to pads on the main board. You have to remove one MOSFET from the main board, but that’s about it for modifications. A nickel strip makes contact with the inside of the iron’s shell, turning it into the sensor plate for the TTP223.

[DoganM95] says that the BA6 variant of the chip is the one you want, as others have a 10-second timeout, which would defeat the purpose of the mod. It’s a very nice bit of design work, and we especially like how the mod board nests so nicely onto the OEM controller. It reminds us a little of those Quansheng handy-talkie all-band mods.